MOTM

Hi MOTM group .

I would try to answer to some of the questions which had been asked .

So to start , the ACS moduls are 100% compatible with MOTM , the mechanical 
size is the same as well as power connector , the moduls use +/-15V , most 
of our users use there 900 with no problem .

The CV input range for all 8 CV inputs is 0 - 2.5V , why ? , as this are 
high precision input for use with the TM-116 , the result is stable 
quantization of the sequence with NO errors .
this inputs can also accept other sources of voltage as Marc had mention 
(midi > cv and such) .

The Quantizer have 4 channels , each channel is a 2 input analog CV mixer  .
one example for the use of this channels is  , patching 2 TMs would create 
32 CV steps sequence , 4 TMs would create 64 CV steps sequence , 3 TMs would 
create 32 CV steps while the threed TM would transpose them both etc etc etc 
(just one small example) .

The CV out range is currently set to 0 - 2.5V which means 2.5 Octave 
according to the 1V/Oct standard .
however the Quantizer use a 16bit EPROM that can be program so the CV output 
can be 0 - 5V , and different scales can be programmed as well  .

The scales which are currently in use are :

http://www.analogic-acs.com/SCALES.xls


Now i wont get on the mail list into the "how to use" , "what it would do 
for me..." etc etc , i would just say that it would make your MOTM speak 
like never before .
I welcome anybody that is interested in an analog control system to contact 
me privately for that information .

Thank you all .

Cheers
Gur Milstein

ANALOGIC Analog Control System

www.analogic-acs.com

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*. 
http://join.msn.com/?page=features/featuredemail