MOTM

So pardon if some of these abservations fall under 'how dense is this 
guy':

* So I can connect the final output(s) of a patch to this device and 
get balanced (TRS or XLR) for each of the inputs, right?  If I've set 
up a patch, for example, that pans left and right, you would preserve 
the 'stereo' out?  If so, what about feeding the IO module 4 outputs 
from a patch (I do this all the time with the 410)?

* Some level indicator is required, I think.  At a minimum a clip LED 
for each channel (I'm not sure if it's better on input or output).

* Will there be gain controls for the outputs?

* The Neutrik connectors have both XLR and TRS in one jack.  You 
could use these to save space on the panel (and add outputs!).

* Overkill: MOTM quality analog to digital stereo output (AES/EBU and 
SPDIF) :) :) :)

Mike


--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@a...> wrote:
> I am designing (yes, it DOES occur from time to time!) a new I/O 
module. This is what I'm
> thinking about:
> 
> a) has 2ea MOTM level-to-balanced out (+4dbu into 2 XLRs and TRS 
jack)
> 
> b) High-end headphone amp with several sneaky tricks (not telling!).
> 
> c) 2ea balanced in (XLR + 1 TRS) to MOTM level (+4dBu >>10V pk-pk)
> 
> Any thoughts (no 100 segment VFD bar graphs...sorry!)
> 
> Paul S.