MOTM

Since you are already having MOTM to line level, how about putting some
line-level balanced screw connectors on the PC board. This way, it can
be wired into the rest of the studio patchbay (or a line-level connecter
on the back of the MOTM case)

Envelope follower and trigger on the ins?

Four outs instead of two?



Dave


> -----Original Message-----
> From: Markk W. Roberts [mailto:motmmarkk@...] 
> Sent: Thursday, August 21, 2003 6:38 PM
> To: MOTM List
> Subject: [motm] design on balanced module
> 
> 
> I am designing (yes, it DOES occur from time to time!) a new 
> I/O module. This is what I'm thinking about:
> 
> a) has 2ea MOTM level-to-balanced out (+4dbu into 2 XLRs and TRS jack)
> 
> b) High-end headphone amp with several sneaky tricks (not telling!).
> 
> c) 2ea balanced in (XLR + 1 TRS) to MOTM level (+4dBu >>10V pk-pk)
> 
> Any thoughts (no 100 segment VFD bar graphs...sorry!)
> 
> Paul S.
> 
> my only idea that I would suggest is that the Jacks used for 
> the XLR and 1/4 be one in the same... Neutrik makes them, 
> center is the 1/4 inch and the outer become an XLR, cause IMO 
> you are going to use one or the other. save on space, and 
> cost's. I love the idea... *including the sneaky tricks*  grin
> 
> Markk
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> ---------------------~--> Buy Ink Cartridges or Refill Kits 
> for Your HP, Epson, Canon or Lexmark Printer at Myinks.com. 
> Free s/h on orders $50 or more to the US & Canada. 
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/VpLolB/TM
---------------------------------------------------------------------~->

 

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/