MOTM

And if you have Tony's WaveFolder, that'll do the trick, too...

--- In motm@yahoogroups.com, "John Loffink" <jloffink@a...> wrote:
> Yes, this will work to a limited extent.  Up control should be at 
or
> near zero and Down control should be about 5.
> 
> Ideally you would precede this with a full wave rectifier.  My DIY 
Diode
> Waveform shaper module can do that, information located here:
> http://www.wavemakers-synth.com/motm/dws.html .  Nothing 
immediately
> comes to mind for accomplishing this with just MOTM modules, but 
somehow
> I feel an MOTM-800 Dual VC Router patch coming on. :-)
> 
> John Loffink
> jloffink@a... 
> 
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com/
> 
> The Wavemakers Modular and Integrated Synthesizer Web Site
> http://www.wavemakers-synth.com/
> 
> > hello,
> > 
> > isn't it possible to use the lag processor as an enveloppe 
follower
> > (with up-pot set to minimum and down-pot set to slew so 
it 'rides'
> > the enveloppe?)
> > 
> > greetz,
> > chef!
> > 
> >