MOTM

It *might* fit if you use smaller pots for the CV and a smaller knob 
and you scrunched up the jacks a little.  Maybe even used smaller 
LEDs.

BTW, the Cyndustries version also has the Amp-Both-Freq feature.

Mike

--- In motm@yahoogroups.com, Mark <yahoogroups@p...> wrote:
> On 6/11/03, Paul Schreiber put forth:
> >
> >Add a CV Mod pot per channel, and GAIN is not exactly "correct"
> >INITIAL is better.
> 
> If you add a CV mod pot (two pots and three jacks per LPG), then 
two
> LPG's would not fit on 1U.
> 
> If you decide on a 2U dual unit and add another jack and another 
knob
> per channel to add new features and fill up the panel, then you 
might
> as well make a 1U single LPG.   No matter how you configure two 
LPG's
> in a dual unit, if each channel has the same amount of features, 
then
> result is always divisible by two :)
> 
> Especailly considering that competing manufacturers offer LPG's, 
adding
> extra features seems important.  Also, didn't the 292 have a
> "amplitude-both-frequency" switch for each channel??  That's a
> feature that might be worth keeping.
> 
> Since most folks don't know what a LPG does, I think 1U module 
would
> sell better than a 2U module -- it would be less of risk.  Anyone 
who
> wants more LPG's could just buy more modules :)