MOTM

Mike, on the LED...

I think the "lens" is actually part of the LED.  The snap-in mounting "flange"
I guess can be removed, but I buy the entire one-part thingy from digikey.
It's a Lumex SSI-LXH387ID, digikey #67-1155-ND (i think).

George
----- Original Message -----
From: <mmarsh@...>
To: <motm@yahoogroups.com>
Sent: Friday, February 28, 2003 2:19 PM
Subject: [motm] Pots and switches


> Hello All -
>
> I'm assembling a Cyndustries module into an MOTM format Schaeffer US
> panel.  The module requires a 10K pot; I've found a Bourns panel-
> mount pot, but it's 9mm. I assume this is OK with a little reaming
> ala Oakley pots.  Is this the right pot?  Or are ther better
> alternatives?  Mouser part #652-3310Y-1-103.
>
> Also, I need 3PDT switches; where can I get these in the same style
> as the NKKs? I see DPDT on Dave's site, but no 3PDT.
>
> Finally, can I use the 5mm LEDs at Mouser (645-550-1105 for red)?
> Where do I get the cool little lenses ala MOTM for these?
>
> Thanks mucho in advance.
>
> Mike
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>