MOTM

How many modules are connected to your power supply.?  Is this the stock
power supply, or have you upgraded the Power One unit to a higher
current unit?

John Loffink
jloffink@... 

> -----Original Message-----
> From: Jeffrey Pontius [mailto:jpont@...]
> Sent: Sunday, February 09, 2003 7:47 PM
> To: motm@yahoogroups.com
> Subject: [motm] 320 bleed-through to 300's?
> 
> For the first time this evening (so may have been going on prior to
this
> evening) I noticed what I think is "bleed-through" from my 320 into my
> 300's and 310's.  When I (only) connect a patch cord from one of the
> waveform outs on any 300 or 310 into the vca of my 110 (and set the
gain
> knob slightly above unity to listen), I can hear the 320  modulating
the
> osc. waveform, and changing the 320's rate knob also  changes the
> waveform's
> modulation rate correspondingly.  It is not very prominent, but
> definitely noticable.  All of  these modules are connected to the same
900
> power supply.  Any ideas?  FWIW, I only built the 310's.  Same thing
> happens when I connect any waveform out to the Blacet mixer/vca, which
is
> on a different power supply.
> 
> Thanks, Jeff
> 
> 
> 
> 
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>