MOTM

I did a breath controller mod for the 850.  I have all the data here.  There
are probably simpler ways to do it that I did it using just a tranny.  But,
I used an op amp and 3 resistors.  I have the documentation, but I have
never made it official on the website.  Any how it is on my to-do list with
too many other things.

I have a joystick interface drawn on paper which I think will be really
cool. It has a LED display which rather chases the joystick position.
However, it has never made it from the paper to the breadboard.  See poor
excuse # 1 above

However, when I get through this current panel run, and get everything
shipped that everyone has been patiently waiting for (much of it starting to
ship next week), I promise to get the breath controller mod documentation
up-to-snuff and on-line.  I wanted to do more than just throw up the
schematic.  I am hoping to take some time off around the holidays and do
stuff.  But, my wife has me in the middle of a huge house project (new front
door, bay window, complete remodel of LR and DR.  I have contractors here
today putting in the window.

Larry Hendry (the tardy Stooge)


----- Original Message -----
From: CHRIS PARKER <cparker@...>
To: <motm@yahoogroups.com>
Sent: Wednesday, November 06, 2002 12:46 PM
Subject: [motm] Things remembered...or was it just a dream?


I seem to remember that around this time last year, there was a thread that
dealt with converting the MOTM-850 Pedal Interface module into an interface
for a Breath Controller (ie- the Yamaha BC-1/2/3, etc.).  I thought Stooge
Larry was doing some experimentation along these lines, but I don't recall
if anything ever came of it and I don't see anything about it on the WiseGuy
site.  I also thought there was some talk of a DIY joystick module at the
same time.

Does anybody have any info on these things, or is the fog that was the late
60's and early 70's just catching up with me?

-Chris-




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/