MOTM

Would it be possible to have a remotely operated relay on the AC 
input, after the rear panel power switch, inside a power supply like 
the MOTM-900? The relay would be controlled by a switch on the front 
panel, so that the wiring from the power supply to the front panel 
carries no power.

I really would like a front panel power switch and power status leds, 
with the AC input on the rear.

Simon
Canberra
AUSTRALIA


>This is NOT a good idea, due to safety reasons.
>
>Paul S.

>----- Original Message -----
>From: <vulture.squadron@...>
>To: "MOTM List" <motm@yahoogroups.com>
>Sent: Friday, August 30, 2002 1:32 PM
>Subject: Re: [motm] Cabinet Power - How To Do It?
>
>>  ----- Original Message -----
>>  From: Simon <simon@...>
>>  > I would like to have AC power connected to the rear of the cabinet,
>>  > with the power switch on the front. Is this possible?
>>
>>  hello all
>>  actually, if stooge industries carry on, i'd very much like them to address
>>  this along with 'official' mods to the existing 900psu to incorporate a 1U
>>  front panel switch
>>
>>  or did we go over this before..?
>>
>>  cheers
>  > paul b