MOTM

Nice Trick!

Thanks Mike,

Josue.

----- Original Message -----
From: "mmarsh100" <mmarsh@...>
To: <motm@yahoogroups.com>
Sent: Thursday, April 18, 2002 10:33 PM
Subject: [motm] Wave shaping using the 700


> Hello All -
>
> This may not be news to some, but I've stumbled on a cool trick.
> Take the SAW out of a 300 to IO A of the 700; take PULSE out of the
> same 300 to IO B of the 700.  Take SIN out of the same 300 to CV IN
> of the 700.  IO X to the console or to further processing.  Put the
> 700 in VOLTAGE MODE.  What happens is that the SAW waveform starts
> and halfway through gets abruptly replaced by the PULSE.  Voila! new
> waveform.  Play with the mix knob some, etc.
>
> Mike
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>