MOTM

Hello All -

This may not be news to some, but I've stumbled on a cool trick.  
Take the SAW out of a 300 to IO A of the 700; take PULSE out of the 
same 300 to IO B of the 700.  Take SIN out of the same 300 to CV IN 
of the 700.  IO X to the console or to further processing.  Put the 
700 in VOLTAGE MODE.  What happens is that the SAW waveform starts 
and halfway through gets abruptly replaced by the PULSE.  Voila! new 
waveform.  Play with the mix knob some, etc.

Mike