MOTM

----- Original Message -----
From: Frank Vanaman <fvanaman@...>
Hmmm. I also ended up making up a little daughter board for the leds, out of
a section of Radio Shack prototype PC board, with 2 sets of eight wire
ribbon cable bits running to each of the bank and wave groups of leds.

--LH--
You will find that I offer alternate solutions in the instruction set
(tweaking now) for LED attachment.  Your suggestion is one of those (I heard
from someone on the list, maybe you).  Another involves freezing the LEDs to
make them fit into smaller holes and then tighten up when they expand to
room temperature.  Dave Hylander is the crazy DIY'er behind that method.

Larry H