MOTM

Hello,

I'm not very knowledgable about electronics so this might be a stupid 
question. I have two 12 unit (21") long wood cabinets, the first of 
which I just filled. I'm now working on the layout of the second 
cabinet. I use wood rails and bolt/nut the modules to them. I noticed 
that my cabinet is deep enough (7 1/2" or so) that I could mount the 
power module (as is/assembled) on the backside if I put a 910 and 800s 
across from it in the front. This would put the 910 about 1 1/2" - 2" 
away from the transformer and the pc board for the 800 would be in 
line with the pc board for the 900 with about 1" - 1 1/2" between 
them. Is this all right? The power supply doesn't seem to get very 
warm, but I'm wondering if the close proximity would have any effect, 
particularly on the 910. I'd like to do this if possible because it 
gives me 3 more units of space, which I'm sure I'll fill :-)

Thanx,
Mr. Nezumi