MOTM

hello all (again)

> --LH--
> The 850 pedal interface has something that you can use for short delays.
It
> generates a gate when the CV gets above a certain threshold.  I would
think
> one could use it several ways.

there is a simple patch i've used involving the 800, the circuit i'm after
is a 'quick solution' - as the list knows, a modular is rarely a quick
solution in a commercial studio situation - a 'quick' patch usually involves
the EG minus output going into the filter FM1

> 2 - Make your own simple circuit where...

noted, i tried one circuit i found on the web, and after the third attempt
gave up - i've also 'designed' something using a pair of 555s but i really
don't think it'll work

> 3 - Or one could add the threshold pot and make the circuit more of a full
> blown comparator and one of the functions is gate delay.

i think maybe a 'pot pourri' panel would be useful - so long as it were tied
into a set of simple schematics - something like 2U with some logic,
inverters, schmitt triggers, comparators etc - who knows..?

cheers
paul b