MOTM

I asked SKB about making taller cases in the shorter depths....I wonder
if I could saw one of the deep ones down the middle?

Subject:
                       Re: SKB X cases in taller versions
            Date:
                       Wed, 29 Aug 2001 11:50:42 -0700
           From:
                       Lynn Weitzel <lynn@...>
                To:
                       John Blacet <blacet@...>
  References:
                       1




Hi John;
   At this time we are not making any larger units for the Shallow X
Racks,
however you are welcome to check back with us at a later date. Also we
do
not make custom cases:
Best Regards,
Lynn Weitzel
SKB Corporation
Phone:800-410-2024x247
Fax:714-283-0425

----- Original Message -----
From: John Blacet <blacet@...>
To: <questions@...>
Sent: Wednesday, August 29, 2001 10:20 AM
Subject: SKB X cases in taller versions


> Hi SKB:
>
> I would be interested in your new "X" line cases in taller versions;
6,
> 9, and 12 RUs.
>
> We build a line of equipment that is very shallow and is kinda "lost"
in
> your deeper cases. There are other people in this industry that would
> also be interested in taller cases. See http://www.modularsynth.com
for
> example.
>
> Are you planning on expanding this line? What would be a minimum run
for
> a custom order?
>
> Regards,
> ___________________
> John Blacet
> Blacet Research
> http://www.blacet.com
>
>

--
___________________
John Blacet
Blacet Research
http://www.blacet.com