MOTM

Um, I might have sent this to Nathan already, but my former ISP 
dumped me, so if I did and he replied, I didn't get a message.

Wouldn't it be easiest just to plug into the FX loop returns of the 
Mesa 400+ amps?  Those are already set for line levels, and (I'm not 
sure about the 400+) most of the Mesa amps I've seen even have an 
input attenuator at the FX return in case the MOTM output is still 
too hot.

    -Doug

--- In motm@y..., Nathan Alan Hunsicker <nate@e...> wrote:
> is there any quick way to get motm levels down to instrument 
levels? i'm
> playing with a guy next week who wants me to run through 4 mesa 400+
> bass amps,  i want to make sure i'm not going to blow the preamps 
out on
> his amps and i don't feel like lugging my PA over either. I don't 
have
> the mixer yet and my smallest mixing board is 36 channels (it 
doesn't
> travel all that well) would tying a resistor between hot and ground 
on
> the final output do any damage to my modules? let me know if anyone 
has
> any ideas. -nate