MOTM

John has a point. Since the BIAS pot must be on the right side due to 
physical constraints, how about if the LEFT side had 3 log pots with 
range 0 - 10, and the RIGHT side had 3 linear pots, two of them 
reversing.

Then mixer 1 is optimized for audio, pot taper wise, and mixer 2 is 
optimized for cvs with reversing attenuators and the bias knob.

Paul, is there any practical reason that the log pots can't go 
offboard?

Moe

--- In motm@y..., "Microtonal" <microtonal@w...> wrote:
> Well, not to be nitpicky, but I would want the bias pot to be on 
the left
> column and mixer, since that side is more likely to be used with 
control
> voltages (linear pots and reversing attenuator).
> 
> I would definitely like to have log pots on the right side mixer.
> 
> John Loffink
> microtonal@w...
>