MOTM

hello all,

to show solidarity, i'd probably order one of these panels...
...although, i'd almost certainly want to go inside my 181 and swap the
trigger out for the bend out
the wiring is a little tight in there, so not many would want to have a go

i currently just use a 3 core mains cable to run the power to the 181 which
i retrofitted with prehdin (locking din) sockets, all the CV stuff just
comes out the 1/4" jacks on the back, with a couple on miniature 1/8" CV
monitor jacks plugged in the top

however, something i am planning, is to just build a simple switching CV
interface, a three way, rotary switch, with inputs for pitch, gate & bend
for two or more devices ie 181 or midicv - a useful little tool, as i
currently have to repatch multiples which frankly gets on my tits

cheers
paul b