Korg Poly800/EX800 Users

Hi

I just got an excellent condition Poly 800mkII off eBay. Everything
works perfectly on it, and I even got a manual with it.

Apparently though, the factory preset sounds have been replaced by
whoever owned it previous to me.

Is there a way to reset those?

Thanks:)

TJ

Sorry about my english...

There are some patch files on the files section, they are in .wav
format... Connect the audio out from your soundcard to the tape-in
jack on the Poly, turn the "tape" key to "enable", then press load
and play the file from your computer... It´s a little difficult to
find the correct volume, but when it is ok, poly will blink "good" on
the panel...

I´ve done it many times and worked ok...Good Luck




--- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
wrote:

> Hi
>
> I just got an excellent condition Poly 800mkII off eBay.

Everything

> works perfectly on it, and I even got a manual with it.
>
> Apparently though, the factory preset sounds have been replaced by
> whoever owned it previous to me.
>
> Is there a way to reset those?
>
> Thanks:)
>
> TJ

I've found it VERY difficult to find the correct volume. It has to be
pretty loud, but not too loud. Finding the right spot takes trial and
error.

Júlio César wrote:

> Sorry about my english...
>
> There are some patch files on the files section, they are in .wav
> format... Connect the audio out from your soundcard to the tape-in
> jack on the Poly, turn the "tape" key to "enable", then press load
> and play the file from your computer... It´s a little difficult to
> find the correct volume, but when it is ok, poly will blink "good" on
> the panel...
>
> I´ve done it many times and worked ok...Good Luck
>
>
>
>
> --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
> wrote:
>
>>Hi
>>
>>I just got an excellent condition Poly 800mkII off eBay.
>
> Everything
>
>>works perfectly on it, and I even got a manual with it.
>>
>>Apparently though, the factory preset sounds have been replaced by
>>whoever owned it previous to me.
>>
>>Is there a way to reset those?
>>
>>Thanks:)
>>
>>TJ
>
>

Thanks guys! It worked well after a bit of trial and error on the
volume as y'all mentioned!

TJ

--- In korgpolyex@yahoogroups.com, Tim Bieniosek <tab27@d...> wrote:
> I've found it VERY difficult to find the correct volume. It has to
be
> pretty loud, but not too loud. Finding the right spot takes trial
and
> error.
>
> Júlio César wrote:
>
> > Sorry about my english...
> >
> > There are some patch files on the files section, they are in .wav
> > format... Connect the audio out from your soundcard to the tape-in
> > jack on the Poly, turn the "tape" key to "enable", then press load
> > and play the file from your computer... It´s a little difficult to
> > find the correct volume, but when it is ok, poly will blink "good"
on
> > the panel...
> >
> > I´ve done it many times and worked ok...Good Luck
> >
> >
> >
> >
> > --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
> > wrote:
> >
> >>Hi
> >>
> >>I just got an excellent condition Poly 800mkII off eBay.
> >
> > Everything
> >
> >>works perfectly on it, and I even got a manual with it.
> >>
> >>Apparently though, the factory preset sounds have been replaced by
> >>whoever owned it previous to me.
> >>
> >>Is there a way to reset those?
> >>
> >>Thanks:)
> >>
> >>TJ
> >
> >