Korg Poly800/EX800 Users

I've found it VERY difficult to find the correct volume.  It has to be 
pretty loud, but not too loud.  Finding the right spot takes trial and 
error.

J\ufffdlio C\ufffdsar wrote:

> Sorry about my english...
> 
> There are some patch files on the files section, they are in .wav 
> format... Connect the audio out from your soundcard to the tape-in 
> jack on the Poly, turn the "tape" key to "enable", then press load 
> and play the file from your computer... It\ufffds a little difficult to 
> find the correct volume, but when it is ok, poly will blink "good" on 
> the panel...
> 
> I\ufffdve done it many times and worked ok...Good Luck
> 
> 
> 
> 
> --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...> 
> wrote:
> 
>>Hi
>>
>>I just got an excellent condition Poly 800mkII off eBay.  
> 
> Everything 
> 
>>works perfectly on it, and I even got a manual with it.  
>>
>>Apparently though, the factory preset sounds have been replaced by 
>>whoever owned it previous to me.  
>>
>>Is there a way to reset those?  
>>
>>Thanks:)
>>
>>TJ
> 
>