Korg Poly800/EX800 Users

Thanks guys!  It worked well after a bit of trial and error on the 
volume as y'all mentioned!

TJ

--- In korgpolyex@yahoogroups.com, Tim Bieniosek <tab27@d...> wrote:
> I've found it VERY difficult to find the correct volume.  It has to 
be 
> pretty loud, but not too loud.  Finding the right spot takes trial 
and 
> error.
> 
> Júlio César wrote:
> 
> > Sorry about my english...
> > 
> > There are some patch files on the files section, they are in .wav 
> > format... Connect the audio out from your soundcard to the tape-in 
> > jack on the Poly, turn the "tape" key to "enable", then press load 
> > and play the file from your computer... It´s a little difficult to 
> > find the correct volume, but when it is ok, poly will blink "good" 
on 
> > the panel...
> > 
> > I´ve done it many times and worked ok...Good Luck
> > 
> > 
> > 
> > 
> > --- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...> 
> > wrote:
> > 
> >>Hi
> >>
> >>I just got an excellent condition Poly 800mkII off eBay.  
> > 
> > Everything 
> > 
> >>works perfectly on it, and I even got a manual with it.  
> >>
> >>Apparently though, the factory preset sounds have been replaced by 
> >>whoever owned it previous to me.  
> >>
> >>Is there a way to reset those?  
> >>
> >>Thanks:)
> >>
> >>TJ
> > 
> >