Re: [korgpolyex] RemoteSL mapping
2017-02-02 by Michael Hawkins
Q: is EG3 the dedicated Pitch Envelope? other than as an LFO source? A: Yes, whenever you see EG modulation in P2 parameters, the source is EG3. Q: what is
Messages
Browse messages
Page 9 of 141 · 7050 messages matched
Re: [korgpolyex] Re: What would everybody think if...
2017-02-02 by Michael Hawkins
I ve been going that route myself. I have a STM32F4 eval kit and am slowly building the development environment. That kit is too expensive though. /Mike From:
RemoteSL mapping
2017-02-02 by domgoold@...
i m going to have a few questions. -first up, is EG3 the dedicated Pitch Envelope? other than as an LFO source? -what is aggressive mode (i ve dug up the
Re: [korgpolyex] Re: What would everybody think if...
2017-02-02 by domgoold@...
what about Axoloti ? it has a modular programming interface, a bit like synthedit - there are some really cool projects on YT, and only needs 1 pcb, it s all
Re: [korgpolyex] Re: What would everybody think if...
2017-02-01 by Michael Hawkins
Thanks for taking the time to run through all that. I remember you pointing me at the teensy before. This time, I shall definitely have a long look at it. On
Re: [korgpolyex] Re: What would everybody think if...
2017-02-01 by bperkins211@...
It was not but a month ago I was messing around with a DSP-G1 chip. First I got it running on my workbench, then I brought it up to plug into my VST studio to
Re: [korgpolyex] Re: What would everybody think if...
2017-01-31 by Michael Hawkins
That s right but what do want when Poly only has a 20mS chorus? For $30 bucks (the kit would be about that) you would get all those cool effects? Both EX800
Re: [korgpolyex] Re: What would everybody think if...
2017-01-31 by Michael Hawkins
Can you change the MIDI to use a higher speed? 31,250 is too slow. I d like to speed that up for starters. Probably close to 100Kbps. Even 250Kbps if
Re: [korgpolyex] hawkmod sysex data format?
2017-01-31 by domgoold@...
HEHE...you re going to have ot help me with some of the abbreviations ;-) i have 8 characters to work with per param title/label: sequencer clock random
Re: What would everybody think if...
2017-01-31 by domgoold@...
for the dsp chip, i can t see any parameters for adjusting the FX,
Re: What would everybody think if...
2017-01-31 by domgoold@...
wild :p have you seen the 80quid flatpack plastic synth that you snap together? given the nature of the poly800 DCOs...there isn t a heap of difference
Re: What would everybody think if...
2017-01-31 by bperkins211@...
I have two of those dsp-g1 chips. Just recently was messing around with one. I have mixed feelings on the sound quality. The filter isnt all that great and
What would everybody think if...
2017-01-31 by Michael Hawkins
I created a new oscillator source based upon a couple of these? http://dspsynth.eu/files/dsp-G1%20manual%20v1.0.pdf Just an idea at this point. And what about
Re: [korgpolyex] hawkmod sysex data format?
2017-01-30 by domgoold@...
no problem, i can get started with that. i ve just done something with something like 400-500 parameters, so this one will be a doddle :-) the extra byte
Re: [korgpolyex] hawkmod sysex data format?
2017-01-30 by Michael Hawkins
Yes, that s a very good point. For now, you will have to use the channel-less SYSEX message. However, I will add yet another sysex message that uses channel
Re: [korgpolyex] hawkmod sysex data format?
2017-01-29 by Gordonjcp
... Sysex messages only specify that the start with $f0 and then the manufacturer and product code, and end with $f7 - there s nothing in the spec about sysex
Re: [korgpolyex] hawkmod sysex data format?
2017-01-29 by domgoold@...
Hi Mike thanks for that;, i m checking it out. i can t see MIDI Channel in that - is that necessary? i m pretty sure all previous sysex i ve dealt with had a
Ranged vs. Absolute Values
2017-01-28 by bperkins211@...
I saw the mention of defaulting to Absolute CC/NRPN controller values. I prefer the Ranged values. First since the GUI I am making has all been set up for
Re: [korgpolyex] hawkmod sysex data format?
2017-01-28 by Michael Hawkins
; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; Patch parameter value change (affects running patch only) ; F0 42 21 0F 0x 0y
Re: [korgpolyex] hawkmod sysex data format?
2017-01-28 by domgoold@...
i also think absolute is best, as a default. but generally you have to offset -1 with editors anyway ie: a list going 1,2,3,4 is 0-3 as is the case with the
Re: [korgpolyex] hawkmod sysex data format?
2017-01-27 by Michael Hawkins
Q: how to address those parameter numbers and send them a value. is it sysex or nrpn ;-) ? A: You can use MIDI CC s (of which there are three different methods
Re: [korgpolyex] hawkmod sysex data format?
2017-01-27 by domgoold@...
yes remote25. that s it. i ve got a remoteSL, Zero, without keys. it s probably got a completely different layout but i was able to open it in the RemoteSL
Re: [korgpolyex] hawkmod sysex data format?
2017-01-26 by Michael Hawkins
Correction...; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ; Patch parameter value change (affects running patch only) ; F0
Re: [korgpolyex] hawkmod sysex data format?
2017-01-26 by Michael Hawkins
I created the Novation Remote template. Not sure what you mean by stripped down since I used just about every slider, knob and button on the SL25. I would
hawkmod sysex data format?
2017-01-26 by domgoold@...
hi, thinking of making a Novation Remote mapping for Hawkmod+atomahawk i m looking at the sysex reference v2.55 and see the byte column - are these the
Re: [korgpolyex] Dead displays
2017-01-10 by andrewsamoyed@...
Thank you for the reply Mike I used plenty of isopropyl to clean it, and tested all the tracks and joints with surface corrosion, they re all fine. I ve
Re: [korgpolyex] Dead displays
2017-01-08 by Michael Hawkins
Since three work and three don t, it s look like you re heading in the right direction. However, you should also check for corrosion of the lines that run from
Dead displays
2017-01-08 by andrewsamoyed@...
Hi Folks, I m a new member but I ve gratefully read your advice in the past when fiddling with a couple of polys. I have a problem with an as-is MkI that I
Handy new HAWK feature
2016-12-21 by Michael Hawkins
I will posting new software update for the HAWK soon. One nice new feature is an easy way to copy EG parameters from one EG to another. It was always
Re: [korgpolyex] Testers wanted : Hawk 800 Max for Live editor
2016-12-20 by Michael Hawkins
Joe, I know it s been a while. Are you doing anything with the Max for Live plugin for HAWK800 now? Is it essentially done? Do I have to have Ableton to use
Re: [korgpolyex] Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-11 by Michael Hawkins
If the Poly 800 works in every way except for sound then I don t think it is the RAM chip. Let s try some more detailed questions first. Are you able to
Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-11 by temsed7@...
P.S.: The link for the service manual: http://www.synfo.nl/servicemanuals/Korg/KORG_POLY-800II_SERVICE_MANUAL.pdf
Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-11 by temsed7@...
Dear Steve, I do thank you for your answer! I have spent my whole morning looking for that component, and actually, it seems this comes from Hitachi...
Re: [korgpolyex] Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-11 by Steve Daniels
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white
Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-10 by temsed7@...
Dear Alex, I do thank you for your very fast answer! If this is the problem, then, is there anything I can or I shouldn t do? Thank you in advance, Gloubi
Re: [korgpolyex] Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-10 by Alex Drinkwater
The Poly-800 Mk.I has an issue where the MIDI buffer would overrun when too much MIDI data was sent to the synth, overwriting patch memory with random data. I
Re: Poly 800 seems to works, no sound or strange sounds at very low volume
2016-12-10 by temsed7@...
Good evening, everyone, I m writing my first message on this great forum, so that maybe someone could help me. I saw this conversation while I was looking for
POLY 800 Noise mod??
2016-11-18 by studio_1a@...
HI folks, I came accross the noise mod once, but for the life of me I can t seem to find it anymore, does anyone know where I can find it? I ve done all other
Re: Write switch now working
2016-11-15 by gleesonalan@...
Hi Steve, that would be awesome thanks :) Alan
Re: Write switch now working
2016-11-14 by stevedanielson1@...
Alan, Off the top of my head, I don t remember, but I ll ask the guy who replaced it. It s the very first one on the main board, and it s just a $5 part, but
Re: Write switch now working
2016-11-12 by gleesonalan@...
Hi Steve, thanks for the info. It s a Poly800 II. It stores the patches loaded from sysex after a power cycle, that s why I think it s not the battery. Could
Re: [korgpolyex] Re: Write switch now working
2016-11-08 by Steve Daniels
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white
Re: Write switch now working
2016-11-05 by gleesonalan@...
Just trying to save edited patches. All the other buttons work fine, and I checked the cabling inside, everything seems in order. Only thing I can think of is
Re: [korgpolyex] Write switch now working
2016-11-04 by Steve Daniels
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white
Write switch now working
2016-11-03 by gleesonalan@...
Hi All Haven t used my Poly 800 II in a while. I now notice the write button is not working. I have replaced the battery correctly, I think. I have loaded
Re: [korgpolyex] Re: The latest news on HAWK
2016-11-03 by bperkins211@...
well having real work is always good ;) it pays the bills. I thought I might share with you what I found recently with the Teensy project. I will most
Re: [korgpolyex] Re: The latest news on HAWK
2016-11-02 by Michael Hawkins
Well, I ve been learning how to populate SMD s on the new AtomaHawk. And I ll be shipping out the first batch to customers very soon. Other than that, not a
Re: The latest news on HAWK
2016-11-02 by bperkins211@...
Any developments? I ve been getting back into messing with arduino and looking to get a Teensy after seeing how easy it is to make a Teensy synth using the
Re: [korgpolyex] Dead? Poly 800 mkii
2016-10-20 by Michael Hawkins
I doubt very much that it s the EPROM. They rarely get corrupted. EPROM s are very stable devices. Much more stable than flash. Get the schematics from the
Dead? Poly 800 mkii
2016-10-19 by lifeisaforeigncountry@...
Hello fellow Poly800 users! I have been talking to Mike via email about my poly 800 mkii issue, but I figured I d post to the group as well to see if there is