Simple Sequencer for Poly
2003-04-21 by Mike Walters
Since the built in sequencer for the Poly 800 is so limited, are there any software based single channel sequencers that I could use for it? Something that
Messages
Browse messages
Page 132 of 141 · 7050 messages matched
Re: [korgpolyex] Midi omni-mode on poly800
2003-04-20 by trip@bluesummers.net
I ve had this happen myself. For some strange reason the Poly doesn t want to react to changing parameter 86 as it should. All I can say is try to get another
Re: DCO's death? HELP!
2003-04-04 by noiz76
Being slightly off topic but... are the KidNepro patches any good? Greets from Switzerland ... cutoff/rez ... 50k ... great, ... tape ... seems
[korgpolyex] Re: poly800 power supply
2003-03-28 by Brandon
Thanks - that make sense to me! Brandon--- On Thu 03/27, Glenn < dftheodore@yahoo.co.uk > wrote:From: Glenn [mailto: dftheodore@yahoo.co.uk]To:
Re: poly800 power supply
2003-03-28 by Glenn
Unregulated adapters will only deliver their rated voltage (e.g. 9v) at their rated current (e.g. 300mA) and so can measure quite high when not connected,
new tracks up...
2003-03-27 by Brandon
Hey all - Just got some new tracks online, at http://home.attbi.com/~anaphylaxis To keep things on topic, I use a Poly 800 with mods in most songs... Comments
Re: poly800 power supply
2003-03-27 by Shayne Cafferata
... i measured all of my power supplies a while back a discovered that most of them were putting out 1 or 2 volts more than their rating, the biggest
RE: [korgpolyex] poly800 power supply
2003-03-26 by Bovadikov, Peter [NCSUS]
Complicating the trivial... I ve been using the radio shack adapter for years with no ill effects. I ll check the specs tonite. Peter Bovadikov, Jr. CISSP
Re: [korgpolyex] poly800 power supply
2003-03-26 by Dave
... There is a lot of leeway in low-voltage DC applications. Probably anything from 7.5 to 12 volts would work, although you want to get the voltage as close
Re: [korgpolyex] poly800 power supply
2003-03-26 by Neil Sauerwein
Thank you all for your replies, but I m still a little confused. The manual states: a.. Be sure to use only the recommended KORG 9V AC adapter (rated at 300
RE: [korgpolyex] poly800 power supply
2003-03-26 by Peter Persson
As long as the voltage rating is correct, it will work fine. The polarity must match the Poly800. There should be markings on the poly and the AC adapter
Re: [korgpolyex] poly800 power supply
2003-03-26 by Jan R(ezníc(ek
Friends, I`m very sorry but I think all of you are wrong. Poly 800 needs 12V supply. I was told it can run on 9V but sometimes power fall down to 8V and this
Re: [korgpolyex] poly800 power supply
2003-03-26 by Brandon
Are you sure about that? From what I have been told, the unitwill draw as many milliamps as it needs, it s the voltage thatmatters... Feel free to correct me
Re: [korgpolyex] poly800 power supply
2003-03-26 by Mike Nelson
never replied to myself before......GAHH! after reading the whole thread I have to be clear about my position on current rating. If your PS is properly
Re: [korgpolyex] poly800 power supply
2003-03-26 by Mike Nelson
Mind the polarity; positive sleeve! Also I recommend at least 500ma preferably 750. I forget the rating of the original. the manic ...
Re: [korgpolyex] poly800 power supply
2003-03-25 by Kenny MACKINS
Any 9 volt power supply will do...you can pick them up at any electrical retailers ... From: korgpolyex@yahoogroups.com Date: 25 March 2003 14:37:42 To:
Re: [korgpolyex] poly800 power supply
2003-03-25 by OlGu
You can use any universal power supply that comes with different voltages and connector adaptors. But it should have 300-500mA max., because it delivers higher
RE: [korgpolyex] poly800 power supply
2003-03-25 by Bovadikov, Peter [NCSUS]
Radio shack. Peter Bovadikov, Jr. CISSP Information Security Consultant Technology Engineering & Development Voice: 908-685-3408 Fax: 908-575-6006 ...
poly800 power supply
2003-03-25 by Neil Sauerwein
Does anyone know where I can get a replacement for the 9 volt power supply? Thanks
Re: [korgpolyex] poly800 power supply
2003-03-24 by trip@bluesummers.net
I ve been using a 1 amp 9v adapter without any problems for quite some time now, so the internal regulator is probly fairly lenient on what voltage it s given.
Re: [korgpolyex] schematics of poly 800 II
2003-03-18 by andres galeotti
hello...thanks..but, not is the same circuit that the poli II...a questions...you know the values for ajust for the vr1, vr2, vr3, etc, etc... thanks
Re: [korgpolyex] Digest Number 207
2003-03-17 by Sintetik
hi guys, have some pleace on the net to buy the mod for poly ???? thanks ! ... From: To: Sent:
Re: [korgpolyex] schematics of poly 800 II
2003-03-17 by Jan R(ezníc(ek
High, friends. I`m new to this forum but I can`t stand not to help a guy who wants to save his pet. I found schematics for Poly 800 on this page:
Re: [korgpolyex] schematics of poly 800 II
2003-03-12 by Mike Nelson
Before surgery, unseat and reseat all connectors between boards. There are quite a few. IIRC delay and eq are on the same board, marked digital delay board .
Re: Digest Number 204 schematics
2003-03-11 by andresgaleotti
oh!! no!!! thanks, but... I looked for this, but I did not find them. For a month I have been looking for poly II..what you think? ... them !!! ...
Re: [korgpolyex] Digest Number 204
2003-03-10 by Sintetik
you have a mod for your poly 800 ?? to search the schmatics , google !!!! you will find a lot of them !!! Hasta !! I m from Brazil ! See ya ... From:
schematics of poly 800 II
2003-03-10 by andres galeotti
don´t work the delay and the eq...please i nedd the schematics ... Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, and more don´t work the delay
i need shematics of korg poly 800 II with delay and eq
2003-03-10 by andresgaleotti
not work delay and eq...why? i need calibrating vr1, vr2, vr3,,etc,etc.. i´m technician but don´t have the shematics. please...help me live in argentine
Re: Problems with the Poly 800-II
2003-03-06 by Kenny
Howdy :) No, the Program write switch is set to Enable as is the Sequencer - well, I have tried with the sequencer switch enables & Disabled. The patches
Re: [korgpolyex] Re: Problems with the Poly 800-II
2003-03-06 by Mike Nelson
Hi again from the manic. It could be that the only problem is the Program Write switch on the back is on Disable to protect the memory. Check that. Again, MkI
Re: [korgpolyex] Re: Problems with the Poly 800-II
2003-03-05 by Skunkride //
maybe try to use the audio ( cassette ) in for patch uploading ? for my MK I poly it worked great (had to feed it very strong signal though)
Which sysex utility
2003-03-05 by Kenny
Hi, Which sysex utility is best for using with Windows XP ? Cheers Kenny
Re: Problems with the Poly 800-II
2003-03-05 by Kenny
Hi Again, Can anyone give me Step By Step instructions how to reload the original sounds using the SYX files ? Now this might make me sound thick, and I might
Re: [korgpolyex] Problems with the Poly 800-II
2003-03-04 by Mike Nelson
Hi, There seems to be a bug in the sysex tranfer firmware that causes the last parameters (which are actually global) to be set outside their normal limits
poly 800
2003-03-04 by q q
i have seen all the cool modz of the poly 800 here, now can some1 in my local area (cali) perform theze modz for cash? if so email direct at
Re: Problems with the Poly 800-II
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Hi, Thanks to everyone for the advice...when my head is a little clearer I will take it all onboard ! Think I will try and load the set 1 set 2 and custom
Re: Problems with the Poly 800-II
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Hi Olaf, The person that I bought it off said that the internal battery had just been replaced. I had a quick look in the files section, but could only find
Re: poly 800 II sequencer
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Hi, Do you have the URL where you found the manual online ? Regards Kenny
Re: [korgpolyex] Problems with the Poly 800-II
2003-03-03 by OlGu
Hi Kenny, that sounds as if your Poly has lost its memory and may need a backup battery. Just search within this forum for battery posts. You can feed sounds
Re: presets for the poly800II
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Hi Scott, Did you have any luck with this ? If so, is it easily done ? Regards Kenny ... you
Re: How to import sys ex files to my poly 800II
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Is this what I should do to correct the problems I am having ?? Kenny
RE: [korgpolyex] Problems with the Poly 800-II
2003-03-03 by Bovadikov, Peter [NCSUS]
Sounds like you need to load the presets. Go to this link... http://members.bluefrognet.net/~rlsnuffy/poly800/
Problems with the Poly 800-II
2003-03-03 by Kenny <kenny@foreverinblack.fsnet.co.uk>
Hi, I have just purchased a Poly 800-II. It didn t have a manual (But I hope to have one very soon), but I have managed to get a very small manual for the
Hello !!!
2003-02-26 by Sintetik
Hi !!!! Somebody from Brazil !!! I m Ricardo, and now I m a new Poly800 MkI user !!! This is really GOOOD ?? The MKII makes the diference ??/ See ya Ricardo
Re: [korgpolyex] Digest Number 198
2003-02-25 by Lee Mulvogue
... For those who can t read German, running it through the Google translator gives an almost readable version:
RE: poly 800 II sequencer
2003-02-24 by Bovadikov, Peter [NCSUS]
I found manual online. All set. Peter Bovadikov Jr. CISSP Information Security Consultant Networking & Computing Services Phone (908) 685-3408 Pager (800)
poly 800 II sequencer
2003-02-24 by Bovadikov, Peter [NCSUS]
Don t have a manual. How does the sequencer work?
Re: poly-800 mdk - sysex for mk1s!
2003-02-24 by jbsepia <echochamberhead@hotmail.com>
This guy did it, and he used a generic memory chip, not the ex`s, he even has both systems (poly and ex) on one chip!
Waveform Mod
2003-02-23 by trip@bluesummers.net
... I ve always thought that the Poly s oscillators had enough wave options as they are, but if you insist... Actually doing some waveshaping would be hairy,
RE: [korgpolyex] poly-800 mdk - sysex for mk1s!
2003-02-23 by Brandon
Check out this link! =) http://analog.no/mods/korg_poly-800_mk-1_sysex.htmI am tempted to try this (or some) mod soon. Let me know if you(or anyone) tries it