Korg Poly800/EX800 Users

Hi,

There seems to be a bug in the sysex tranfer firmware
that causes the last parameters (which are actually
global) to be set outside their normal limits whenever
transfers are done. If you go to the paras. 85 through
88 and the numbers are too high or even hieroglyphics,
you need to use the down button to return each one to
'legal' limits. Then it should work OK. You may have
to turn the Poly off and back on too.

Good luck!
the manicmaestro

ps no,MkI patches will not work in the MkII.
--- "Kenny <kenny@...>"
<kenny@...> wrote:
> 
> 
> Hi,
> 
> I have just purchased a Poly 800-II.  It didn't have
> a manual (But I 
> hope to have one very soon), but I have managed to
> get a very small 
> manual for the original poly.
> 
> I got it today, and set it all up to the PC,
> However, It sounds 
> Terrible.  Lots of 'Hiss/Feedback/duff notes.
> There doesn't seem to be much wrong with oit itself,
> I think it just 
> needs the sounds setting up correctly.
> 
> Any advice ?  How do I get the synth to go back to
> it;s default 
> settings ?
> 
> Any help will be more than welcome.
> 
> Regards
> 
> Kenny
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/