Sorry about my english...
There are some patch files on the files section, they are in .wav
format... Connect the audio out from your soundcard to the tape-in
jack on the Poly, turn the "tape" key to "enable", then press load
and play the file from your computer... It´s a little difficult to
find the correct volume, but when it is ok, poly will blink "good" on
the panel...
I´ve done it many times and worked ok...Good Luck
--- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
wrote:
There are some patch files on the files section, they are in .wav
format... Connect the audio out from your soundcard to the tape-in
jack on the Poly, turn the "tape" key to "enable", then press load
and play the file from your computer... It´s a little difficult to
find the correct volume, but when it is ok, poly will blink "good" on
the panel...
I´ve done it many times and worked ok...Good Luck
--- In korgpolyex@yahoogroups.com, "tjmahan831" <malachi_31@y...>
wrote:
> HiEverything
>
> I just got an excellent condition Poly 800mkII off eBay.
> works perfectly on it, and I even got a manual with it.
>
> Apparently though, the factory preset sounds have been replaced by
> whoever owned it previous to me.
>
> Is there a way to reset those?
>
> Thanks:)
>
> TJ