Korg Poly800/EX800 Users

I think, with all the extra parameters, the text would have to be  
pretty small. Having said that, there's a similar parameter matrix  
printed on the front of the EX-8000, and that's perfectly readable,  
and quite handy. I must admit, I do find myself reaching for the Hawk  
manual quite a lot...

a|x



On 20 Nov 2008, at 20:35, David Mochen wrote:

> Hi Mike,
>
> I don't intend to get a definitive response to this, given the  
> present state of development in the Hawk project, but I was  
> wondering if it would be possible to create some layout for all the  
> parameters of the Hawk 800 so that we could make a stenciled  
> faceplate and glue it over the existing onenon the poly's right  
> panel over the keyboard, for a quick reference... does the number of  
> parameters make it look like a feasible task? we could get it  
> properly designed for maximum readability...
>
> thanks
>
> dave
>
> ----- Original Message -----
> From: Michael Hawkins
> To: korgpolyex@yahoogroups.com
> Sent: Thursday, November 20, 2008 3:36 PM
> Subject: [korgpolyex] Sustain pedal
>
>
> Hi Poly fans,
>
> This new feature is one coming from out of the blue.
>
> I have implemented a sustain pedal function. The original pedal jack  
> is for incrementing the patch numbers. That is something that I  
> NEVER used.
>
> So I've implemented a new global parameter (17) that allows you to  
> make the pedal jack into a sustain pedal.
>
> At the moment, it only holds the notes at the sustain level. When  
> you release the pedal the notes that you have let go are then  
> released. The pedal is basically "holding" the notes.
>
> Now I am going to try to implement a second sustain pedal mode that  
> will not only hold the notes at sustain point but will also change  
> the decay of the EG's. I will be trying to add an extended parameter  
> that allows setting the decay offset for the sustain pedal. This  
> offset would be added to the set decay. And then another mode will  
> add the offset to the release too (maybe we need a second extended  
> parameter to determine the release offset).
>
> I'll let you all know how that works out.
>
> Mike.
>
>
>
> From: "electrohead2000@..." <electrohead2000@...>
> To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
> Sent: Tuesday, November 18, 2008 10:38:41 AM
> Subject: Re: [korgpolyex] AtomaHawk preorders!
>
>
> I will be ordering both kits at the same time :)
>
>
>
> On Nov 17, 2008, at 8:41 AM, "korgpolyex800" <korgpolyex800@  
> yahoo.com> wrote:
>
>> I am now ordering parts for the AtomaHawk kit.
>>
>> But before I do, I would like to get an idea of...
>>
>> How many of you would be about to order the HAWK-800 along with the
>> AtomaHawk when I announce the AtomaHawk is ready?
>>
>> And how many of you that already have the HAWK-800 will be ordering
>> the AtomaHawk?
>>
>> Mike
>>
>>
>
>
>
>