Korg Poly800/EX800 Users

You know I have given some thought to this.

But I have no idea where to start looking to get something done like that.

Any suggestions?

Mike.




________________________________
From: David Mochen <davidmochen@...>
To: korgpolyex@yahoogroups.com
Sent: Thursday, November 20, 2008 3:35:06 PM
Subject: [korgpolyex] parameter map/chart


Hi Mike,
 
I don't intend to get a definitive response to 
this, given the present state of development in the Hawk project, but I was 
wondering if it would be possible to create some layout for all the parameters 
of the Hawk 800 so that we could make a stenciled faceplate and glue it over the 
existing onenon the poly's right panel over the keyboard, for a quick 
reference... does the number of parameters make it look like a feasible task? we 
could get it properly designed for maximum readability. ..
 
thanks
 
dave
 
----- Original Message ----- 
From: Michael  Hawkins 
To: korgpolyex@yahoogro ups.com 
Sent: Thursday, November 20, 2008 3:36  PM
Subject: [korgpolyex] Sustain pedal

Hi Poly fans,

This new feature is one coming from out of the  blue.

I have implemented a sustain pedal function. The original pedal  jack is for incrementing the patch numbers. That is something that I NEVER  used.

So I've implemented a new global parameter (17) that allows you  to make the pedal jack into a sustain pedal.

At the moment, it only  holds the notes at the sustain level. When you release the pedal the notes  that you have let go are then released. The pedal is basically "holding" the  notes.

Now I am going to try to implement a second sustain pedal mode  that will not only hold the notes at sustain point but will also change the  decay of the EG's. I will be trying to add an extended parameter that allows  setting the decay offset for the sustain pedal. This offset would be added to  the set decay. And then another mode will add the offset to the release too  (maybe we need a second extended parameter to determine the release  offset).

I'll let you all know how that works  out.

Mike.






________________________________
 From: "electrohead2000@ yahoo.com"  <electrohead2000@ yahoo.com>
To: "korgpolyex@ yahoogroups. com"  <korgpolyex@yahoogro ups.com>
Sent: Tuesday, November 18, 2008 10:38:41  AM
Subject: Re: [korgpolyex]  AtomaHawk preorders!


I will be ordering both kits at the same time :)




On Nov 17, 2008, at 8:41 AM, "korgpolyex800" <korgpolyex800@ yahoo.com>  wrote:


I am now ordering parts for the AtomaHawk kit.

But before I do, I  would like to get an idea of...

How many of you would be about to  order the HAWK-800 along with the
AtomaHawk when I announce the AtomaHawk  is ready?

And how many of you that already have the HAWK-800 will be  ordering
the  AtomaHawk?

Mike