Re: Memory damaged?
2008-02-19 by wintermute0815
Hi, I checked the sample you uploaded. Especially in the end of your sample the sound suddenly goes back to normal, right? If I had a problem like this I would
Yahoo Groups archive
Messages
Page 35 of 48 · 2353 messages matched
2008-02-19 by wintermute0815
Hi, I checked the sample you uploaded. Especially in the end of your sample the sound suddenly goes back to normal, right? If I had a problem like this I would
2008-02-19 by emuarc2
Hi list members, I have uploaded the Emulator User Guide, which includes stop codes and much more about getting the Emulator working. I wrote this a few years
2008-02-19 by elmbeatz
hehe, me too ;)
2008-02-19 by Rv Vt
hi Mako, do u exchange sound disk?? i m searching for factories disks!! bye! rv ... De : Marko Laukka À :
2008-02-19 by Kenneth Abildgaard
Well … It may sound silly, but I have three Emax samplers (an ‘ordinary’ 1000, an SE and a SE Plus) an Emulator II+ and an Emulator I (which I am gonna
2008-02-19 by Marko Laukka
Yup, I have both the emax rack and the keyboard ;) /Marko elmbeatz skrev: hehe, I think nearly everybody on this list is also an emax
2008-02-19 by elmbeatz
Sorry, no memory check disk...
2008-02-19 by elmbeatz
Hi! I know, but I indeed have problems with the output channels and the filter. I do not have ram problems (well not yet ;) but i can clearly hear how
2008-02-19 by wintermute0815
Sounds like you really had a lot of fun yesterday :)! I also checked my voiceboard but I think the scratching is not caused by the voiceboard. I think if
2008-02-19 by elmbeatz
hehe, I think nearly everybody on this list is also an emax user... at least I am.. Greetz, Elm.
2008-02-19 by hvr128
--ok it s a old fashion trade 12bits older in efective than emax!! more lfo , i guess,but still the seem polyphonie,as well!! if u knows about user from emax
2008-02-19 by Rv Vt
salut, j ai le boot du emax 1,et je recherche également des sons.. si sa peut t aider... autrement va sur / www.audiofanzine.fr et demande sur le topic des
2008-02-19 by elmbeatz
Hi! Don t know yet - I made my way just through the output board yesterday evening. That was a hell of work and patience. Took out each and every IC, cleaned
2008-02-19 by wintermute0815
Hi Elm, any success? I ordered 40 (hope this is enought) 4164s. Hope this solves my problem as well. They have 120ns timing. Is there a problem useing them
2008-02-19 by thomas balogh
Hi I m Thomas From France, It s my first message on the list. I ve got an Emlator I serial n°103 ( one week )and an emulator II+ with a 3.5 floppy from 66 (
2008-02-19 by GG
Elm, Still trying to get this E1 to boot. I added a few pics of the jumpers on the two drives that I am trying to get to work. Both are 400L models, not sure
2008-02-18 by mishon66@aol.com
We have new 2008 replacement drive for the Ell at www.Route66stuidoos.com ?Rich ... From: saerling To: emulatorII-list@yahoogroups.com Sent: Mon, 18 Feb 2008
2008-02-18 by saerling
Hi guys. I d like to find out what floppy drives are compatible with the Emulator II. I obviously know about the drives listed on Emulator Archive (Shugart
2008-02-18 by elmbeatz
Ha ha, cool, I ve had a similar idea... I still got a raw EII casing (actually played once in Hamburg by Alan Wilder), in which I wanted to put a usb midi
2008-02-18 by GG
Think you got the better deal, 8V no missing parts. ... http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ ...
2008-02-18 by GG
Mike, Yea, its a small world when it comes to Shugart disk jumpering:) If this E1 decides to be too much of a basket case I might preform an act of blasphemy.
2008-02-18 by Kenneth Abildgaard
Ha ha .. Not bad. Just got mine off eBay too for approx 400 USD in total including shipping to Denmark. Gonna pick it up tomorrow or the day after tomorrow..
2008-02-18 by GG
Yes, that was in fact me 111 for the Emulator 150 to ship. ... http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ ...
2008-02-18 by GG
Elm, Hey thanks! That will save me allot of time and guess work. Looks like It s just a matter of getting the right angle. Regards, G ...
2008-02-18 by rob
Hi Most of the original 25 Emulators from 1981 (no sequencer, no VCA envelope) were upgraded to the Mark II . Certainly they all have envelopes as Dave Rossum
2008-02-18 by elmbeatz
Hi G! Take a look in the photos section. I found a picture of my Drive mounting and posted it there. As well as a picture of my serial plate. Greetings, Elm.
2008-02-18 by Mike de Vries
How funny, I ve just stuck a refurbished Shugart 400L in my Emulator1.. so I went through the whole jumpers thing.. (I stuck the jumpers off my old drive into
2008-02-18 by Kenneth Abildgaard
Ha ha .. Man – If that should be true you’d get a million USD for it on eBay J Kenneth Fra: emulatorII-list@yahoogroups.com
2008-02-18 by elmbeatz
I saw that one on ebay, too :) Btw.: My EI s casing ser.-No. is 001B (B for eight voice I guess). It s a little strange, because it has many upgrades though..
2008-02-18 by elmbeatz
Hi! Maybe you should do what I was told, and what I m gonna be doing tonight at home: Reseat all the ICs on both EII boards. This will be tough, but as their
2008-02-18 by Kenneth Abildgaard
Hi G. I guess you bought the one from Canada right ? I saw the Emulator with no disk drive on eBay I remember. It this the one you bought ? Kenneth Abildgaard
2008-02-18 by GG
Elm, I had a similar type of encounter back in the early 90s, I bought this E1 from a group called Voice Farm, it came with all their samples:). It stopped
2008-02-16 by wintermute0815
Hi, I just realized that my EII has some issue. When sampling and assigning key areas it could happen that one of the sounds starts to scratch. If I delete
2008-02-14 by hexafuzz
... Thanks Kenneth! :)
2008-02-14 by Kenneth Abildgaard
Hi Hexafuzz. Sorry about the fileformat of my EII bank. I will SIT it today and upload it again. Kenneth Fra: emulatorII-list@yahoogroups.com
2008-02-13 by hexafuzz
First, thanks to the recent posters for sharing their samples with the group! A couple quick moderation points concerning sample uploads: 1. All Sound Designer
2008-02-13 by Sean Wolcott
Mike! Thanks so much. This sounds lovely, will put these to some good use ASAP. Thank you thank you thank you! -Sean
2008-02-13 by saerling
Well ... I sampled the Black Celebration (Alan Wilder demonstation) samples that are on the 101 DVD. I tried to put them on the same keys as in the clip but I
2008-02-13 by emulatorII-list@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the emulatorII-list group. File :
2008-02-13 by wintermute0815
Hi Mike! Thanks for uploading the samples. I will try to port them to my EII soon and let you know if they sound as expected :). I also did some research on my
2008-02-13 by mrjdevries
Hey all, I ve uploaded this choir sample.. It s taken from the Male Voices & Mixed Choir sample disk made by EMU. For those that care, It was recorded
2008-02-13 by emulatorII-list@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the emulatorII-list group. File :
2008-02-12 by elmbeatz
I bought mine in 91 without any disks. Back in those days, E-Mu still was a company on their own feet, and they gave me support, as they sent me all software
2008-02-12 by GG
rv, I m talking way before the emax, more like this: http://www.eboardmuseum.com/FOTO%20EMU%20EMULATOR.jpg ...
2008-02-12 by GG
Glad I m not the only one. Do you have the 8 or 4 Voice model? I just got a 4 voice and some of the cables are unplugged from the mother board and I m not sure
2008-02-12 by Max Fazio
Interesting...have you all some of the original presets? Ever thought of making a backup of the original sounds simply recording the base samples on common
2008-02-11 by kevin kelley
I have and use my EI quite a bit. Kevin Kelley ... ____________________________________________________________________________________ Be a better friend,
2008-02-11 by brian_ronn
Hi Fellow EII fanatics ;-) After 10 days of testing a PowePC 4400/200 I regret to conclude that this machine won t work with SoundDesigner. I ve tried with OS
2008-02-11 by Rv Vt
well,my emax is 5 voice poly! dank rv ... De : GG À : emulatorII-list@yahoogroups.com Envoyé le : Lundi, 11 Février 2008, 19h31mn 01s
2008-02-11 by GG
Glad I m not the only one. Do you have the 8 or 4 Voice model? I just got a 4 voice and some of the cables are unplugged from the mother board and I m not