Re: EII to DPX translation software
2009-09-19 by christian.schwank
Hi, I translated an .EII File with the DPXTools Software into the DPX Image Data. Size goes up from 475kb to 880kb! My Floppy Disks only have 720 kb Space. I
Messages
Browse messages
Page 21 of 48 · 2353 messages matched
just bought a Emulator II+ service info needen please
2009-09-12 by alessandrorescio
I just bought a II+ i m very happy with it exept that it needs a bit of service. 2 voices are dead and 1 is distorting. I opened the lith and noticed that 4
Re: just about to purchase a Emulator II+ need some info please!
2009-09-10 by alessandrorescio
... thanks for your help and advise!
Re: just about to purchase a Emulator II+ need some info please!
2009-09-10 by elmbeatz
Yes, it is the setup, indeed (Mac + Sound designer for EII). Concerning tech issues: First thing I would do, is to reseat each and every IC inside the
just about to purchase a Emulator II+ need some info please!
2009-09-10 by alessandrorescio
i m very excited, this saturday i m going to look at a II+ version. It has two 5.25 drives. The seller mentioned that it needs a bit of service though. I don t
Emulator II + HD one last time before ebay
2009-09-08 by xirin6
I have a Excellent / Mint phsyical condition Emulator II + HD that I need to sell. The emulator appears to have power supply problems. Worked fine the other
Re: E II reads floppy disks only sometimes
2009-07-29 by hexafuzz
You might try cleaning your drives with canned compressed air, as well as reseating all power/data cable connectors. Clean the cable contacts (DeoxIT) while
E II reads floppy disks only sometimes
2009-07-29 by holgmanackis
Hi, I have problem with my Emulator II which reads the floppy disks only sometimes. In detail: When I turn on the Emu the display says ***Emulator 2*** Boot
Re: Help! "SimasiMac" on an SE/30 connected to an EII+ HD
2009-07-28 by Mike de Vries
While not exactly the same as my fault.. My mac would sometimes boot up, and hang on a checker board type screen. After fishing around on the 68KMLA
Re: Help! "SimasiMac" on an SE/30 connected to an EII+ HD
2009-07-27 by George
Hi Brandt, I only can confirm what already has been said. I had the same problem recently with my Classic. After replacing the battery the problem was gone.
Re: Help! "SimasiMac" on an SE/30 connected to an EII+ HD
2009-07-27 by esynthesist
I ve read about this particular pattern on the Mac screen on other forums a while ago. As far as I remember the most common cause is a weak battery. Replacing
Re: Help! "SimasiMac" on an SE/30 connected to an EII+ HD
2009-07-27 by hexafuzz
You can also ask here: http://68kmla.net/forums/ ... If things dont work out, you may be able to recover your data by moving the HD to another Mac.
Help! "SimasiMac" on an SE/30 connected to an EII+ HD
2009-07-27 by ditabeardmemo
Hi everyone: I realize this is somewhat off-topic, as this is mainly a discussion board for EII technical issues, but I was hoping someone could help with a
Re: Sampled sound very low in volume.
2009-07-22 by George
Mike, No, the audio that goes thru during metering and during the actual sampling process sounds in its full glory. What do you think? George
Re: Sampled sound very low in volume.
2009-07-22 by Mike de Vries
cool, but to my last question.. when you play a sound thru the emulator, ie monitoring it, is the sound also quiet? Regards Mike ... From: George
Re: Sampled sound very low in volume.
2009-07-22 by George
Hey Mike, It plays back non-distorted but very low in volume, barely-audible low. And that s with the master volume cranked up to max. My thought is that if
Re: [emulatorII-list] Re: Sampled sound very low in volume.
2009-07-22 by Mike de Vries
When you play the audio back, and turn it up heaps, how does it sound? (Thin / dull / distorted etc) Hopefully it s a dry joint or a dud op-amp.. When
Re: [emulatorII-list] Re: Faulty voice on a EII+HD, need help
2009-07-22 by Mike de Vries
Another EII user in Australia (Unless you are talking about another Melbourne?)... great.. (Sydney) ... From: synth.junkie
Re: Faulty voice on a EII+HD, need help
2009-07-21 by synth.junkie
Thanks for the advice, Im a tech, I dont work on keyboards but can do the basics. Will probably check the board next for bad solder/tracks as you mentioned and
Re: Faulty voice on a EII+HD, need help
2009-07-21 by George
Hi Rob, It sounds like the same problem I had with mine. Mine played the faulty channel back very low in volume and distorted. I also had tried everything you
Re: Sampled sound very low in volume.
2009-07-21 by George
Mike, Thanks for the response. I m aware of the gain settings on page 3 and tried various settings from 0 to 40db. I also metered the input audio close to
Re: Faulty voice on a EII+HD, need help
2009-07-21 by synth.junkie
Sorry about the extra posts, I was having difficulties with my pc and didn t think they went through. Anyway, I have reseated all the IC s on the output board.
Re: [emulatorII-list] Sampled sound very low in volume.
2009-07-21 by Mike de Vries
this souds obvious, but is the input gain high enough? (Not just the knob, but the gain setting... SAMPLE page 3 ) Whats it metering on your EII when you
Sampled sound very low in volume.
2009-07-20 by George
Hi, After I sample a sound, it plays back very low in volume. During the metering/ gain adjusting process the input audio is looped thru in it s normal volume
Re: [emulatorII-list] Faulty voice on a EII+HD, need help
2009-07-20 by Mike de Vries
Sheesh... whats with the 8 posts? First thing I d try is to re-seat the IC s.. this involves gently slightly removing the IC s (With a small screw
Re: [emulatorII-list] Faulty voice on a EII+HD, need help
2009-07-20 by WT
I think we get the message by now......this is message number six. Maybe you don´t get any replies via the list ? Check your spamfilter. As for the problem I
Faulty voice on a EII+HD, need help
2009-07-20 by synth.junkie
Hi, I own a EII+HD. When i turned it on today every 8th keypress it did not make a sound. Now it plays the sample but it sounds very distorted on the same
Re: [emulatorII-list] Emulator II + hd Dim LCD ?
2009-07-18 by caddyfam
... From: Kevin Kelley To: emulatorII-list@yahoogroups.com Subject: [emulatorII-list] Emulator II + hd Dim LCD ? Date: Mon, 13 Jul 2009
Emulator II + hd Dim LCD ?
2009-07-13 by Kevin Kelley
I currently have an EII = HD that the backlight is out and now it seems to have an issue where the LCD screen is dim. Is this issue part of the problem with
RE: [emulatorII-list] FS emulator II + HD, Emulator I w/jlcooper genmod/ emax SE HD
2009-07-04 by rob
Hi Kevin That is one special Emulator I, very rare - hope it goes to a good home. The Genmod adds a warm SSM VCF and ADSR s... fantastic sounds. Regards Rob
FS emulator II + HD, Emulator I w/jlcooper genmod/ emax SE HD
2009-07-03 by Kevin Kelley
All located in Fl emax is for parts but in excellent physical condition. asking 125 + shipping for emax E2 + HD is in excellent condition HD is flakey physical
Re: [emulatorII-list] New Boot Rom Needed
2009-06-20 by Rish
Hey Lance We have them available at www.Route66studios.com Richard ... From: lancelink84 To: emulatorII-list@yahoogroups.com Sent: Friday, June 19, 2009 11:32
New Boot Rom Needed
2009-06-20 by lancelink84
Hello all, I m in desperate need of a new boot rom for my EII+ HD...any ideas on where I can pick one up? Thanks in advance! Lance
Re: EII Restoration project
2009-06-01 by Simon_Owen
Pictures of EII now in photo gallery. Colour is basically black Hammerite spray. Lettering on back panel is redone. Enjoy Simon
Re: [emulatorII-list] Re: my emulator ii is out of tune
2009-05-29 by Mike de Vries
Just like I first said eh? ;-] ... From: pakmario Subject: [emulatorII-list] Re: my emulator ii is out of tune To:
Re: my emulator ii is out of tune
2009-05-28 by pakmario
thanks. the problem was the pitch wheel calibration. : )
Re: my emulator ii is out of tune
2009-05-27 by hexafuzz
If not the pitch wheel and all pitches are uniformly sharp or flat, check your power supply voltages and connections. DISCLAIMER: Be careful & smart: Working
Re: EII Restoration project
2009-05-27 by pakmario
hi simon. you can get a new front panel from: http://www.eprelectronics.com/store/cart.php?m=product_list&c=12 regards. mario.
Re: my emulator ii is out of tune
2009-05-27 by pakmario
the pitch wheel is ok. is the trimmer near the memory board?
Re: [emulatorII-list] my emulator ii is out of tune
2009-05-27 by Mike de Vries
Maybe your pitch wheel is out of calibration? From memory there is a trimmer that is near the wheel (or where it connects to the board) that is for just
my emulator ii is out of tune
2009-05-27 by pakmario
does anybody knows how to tune the emulator ii without using the TUNE function in the master control panel. the overall tunning, wich is out of tune differs
EII + HD Vacuum florecent display modification Question
2009-05-07 by Kevin Kelley
I have an EII + HD with a failing display, I have seen other synths that had the LCD display replaced with a VFD display and the synths always look really
Re: EII Restoration project
2009-05-06 by elmbeatz
Have a look here: http://launch.groups.yahoo.com/group/emulatorII-list/message/1664
EII Restoration project
2009-05-05 by Simon_Owen
Hi There I m almost through with my EII+ restoration. I ve had the outer casing sprayed up, new backlight done, sticky buttons unsticky-ed, still need a top
Re: Midi program change on my E2 + HD.
2009-05-03 by hexafuzz
... You can pre-load a bank and then use midi to change/call presets within that bank. But AFAIK you cannot issue bank load commands over midi. On a double
CDS3 cdrom drive replacement
2009-05-03 by pakmario
hi! does anybody tried to fix or replace just the cdrom drive?. mine is broken : / regards.
Midi program change on my E2 + HD.
2009-05-02 by Kevin Kelley
Is it possible to issue a midi program change in a sequencer and have the program change load a specified bank on the E2 + HD? And if it is capable of loading
Re: Emulator 1 measurements
2009-05-01 by oceanoftenderness
Thanks so much... The measurements you list should be good enough :-) ocean
Re: [emulatorII-list] Emulator 1 measurements
2009-04-30 by Kenneth Abildgaard|OIIO
I found this in one of my many PDF files regarding Emulators: Dimensions Length - 37.5 Depth - 15 Height - 8 Weight - 75 lbs. If you need more exact info
Emulator 1 measurements
2009-04-30 by oceanoftenderness
Hi there, I am trying to design a 3D model of the Emu Emulator I. The photos on the Internet provided enough detail to make such a model, but I am stuck. I