eml synthesizers

It has been a VERY long time (1970's) since I worked on a 101, but don't recall why there might be interface problems - not to say that there aren't any. (I was New Jersey EML sales & service back then)

Other than the 1.2 V/oct issue, is it just that the Doepfer is not triggering the 101? I'm pretty sure that could be fixed by adjusting some resistor values in the 101.

Doug

--- In emlsynth@yahoogroups.com, Matt <matt.fretton@...> wrote:
>
> Hi Oliver,
>
> Initially it can be a source of frustration that the EML synths won't sync
> with anything else (it's partly the 1.2v/oct and partly the weirdness of the
> input jacks) but when you forget about that they're great synths, although I
> must admit mine is on eBay right now as I haven't used it since I put
> together my modular.
>
> Matt
>
> On 12 August 2011 12:53, Oliver Chesler <oliverchesler@...>wrote:
>
> > **
> >
> >
> > Hi Matt,
> >
> > Thanks for the heads up. I thought that was the answer but I was double
> > checking. I'm using the Dark Time with some other gear (really nice little
> > unit). Too bad it won't work with the 101 too.
> >
> > - Oliver
> >
> > --- In emlsynth@yahoogroups.com, Matt <matt.fretton@> wrote:
> > >
> > > Search the archives and you'll see the issue of compatibility between the
> > > EML synths and everything else discussed several times, however, the
> > short
> > > answer to your question is "no".
> > >
> > > On 12 August 2011 12:07, Oliver Chesler <oliverchesler@>wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Hello Everyone,
> > > >
> > > > Is it possible to control an Electrocomp-101 with a Doepfer Dark Time
> > > > analog sequencer? I have both but can't seem to get it to work. If it
> > is
> > > > possible can someone tell me what cables I should connect where and
> > what
> > > > knob settings I should use?
> > > >
> > > > Big thanks for any advice!
> > > >
> > > > - Oliver
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>