Yahoo Groups archive
Thread
2011-08-12 by Oliver Chesler
Hello Everyone, Is it possible to control an Electrocomp-101 with a Doepfer Dark Time analog sequencer? I have both but can't seem to get it to work. If it is possible can someone tell me what cables I should connect where and what knob settings I should use? Big thanks for any advice! - Oliver
2011-08-12 by Matt
Hello Everyone,
Is it possible to control an Electrocomp-101 with a Doepfer Dark Time analog sequencer? I have both but can't seem to get it to work. If it is possible can someone tell me what cables I should connect where and what knob settings I should use?
Big thanks for any advice!
- Oliver
2011-08-12 by Oliver Chesler
Hi Matt, Thanks for the heads up. I thought that was the answer but I was double checking. I'm using the Dark Time with some other gear (really nice little unit). Too bad it won't work with the 101 too. - Oliver --- In emlsynth@yahoogroups.com, Matt <matt.fretton@...> wrote:
> > Search the archives and you'll see the issue of compatibility between the > EML synths and everything else discussed several times, however, the short > answer to your question is "no". > > On 12 August 2011 12:07, Oliver Chesler <oliverchesler@...>wrote: > > > ** > > > > > > Hello Everyone, > > > > Is it possible to control an Electrocomp-101 with a Doepfer Dark Time > > analog sequencer? I have both but can't seem to get it to work. If it is > > possible can someone tell me what cables I should connect where and what > > knob settings I should use? > > > > Big thanks for any advice! > > > > - Oliver > > > > > > >
2011-08-12 by Matt
Hi Matt,
Thanks for the heads up. I thought that was the answer but I was double checking. I'm using the Dark Time with some other gear (really nice little unit). Too bad it won't work with the 101 too.
- Oliver
--- In emlsynth@yahoogroups.com, Matt wrote:
>
> Search the archives and you'll see the issue of compatibility between the
> EML synths and everything else discussed several times, however, the short
> answer to your question is "no".
>
> On 12 August 2011 12:07, Oliver Chesler wrote:
>
> > **
> >
> >
> > Hello Everyone,
> >
> > Is it possible to control an Electrocomp-101 with a Doepfer Dark Time
> > analog sequencer? I have both but can't seem to get it to work. If it is
> > possible can someone tell me what cables I should connect where and what
> > knob settings I should use?
> >
> > Big thanks for any advice!
> >
> > - Oliver
> >
> >
> >
>
2011-08-12 by Doug
It has been a VERY long time (1970's) since I worked on a 101, but don't recall why there might be interface problems - not to say that there aren't any. (I was New Jersey EML sales & service back then) Other than the 1.2 V/oct issue, is it just that the Doepfer is not triggering the 101? I'm pretty sure that could be fixed by adjusting some resistor values in the 101. Doug --- In emlsynth@yahoogroups.com, Matt <matt.fretton@...> wrote:
> > Hi Oliver, > > Initially it can be a source of frustration that the EML synths won't sync > with anything else (it's partly the 1.2v/oct and partly the weirdness of the > input jacks) but when you forget about that they're great synths, although I > must admit mine is on eBay right now as I haven't used it since I put > together my modular. > > Matt > > On 12 August 2011 12:53, Oliver Chesler <oliverchesler@...>wrote: > > > ** > > > > > > Hi Matt, > > > > Thanks for the heads up. I thought that was the answer but I was double > > checking. I'm using the Dark Time with some other gear (really nice little > > unit). Too bad it won't work with the 101 too. > > > > - Oliver > > > > --- In emlsynth@yahoogroups.com, Matt <matt.fretton@> wrote: > > > > > > Search the archives and you'll see the issue of compatibility between the > > > EML synths and everything else discussed several times, however, the > > short > > > answer to your question is "no". > > > > > > On 12 August 2011 12:07, Oliver Chesler <oliverchesler@>wrote: > > > > > > > ** > > > > > > > > > > > > Hello Everyone, > > > > > > > > Is it possible to control an Electrocomp-101 with a Doepfer Dark Time > > > > analog sequencer? I have both but can't seem to get it to work. If it > > is > > > > possible can someone tell me what cables I should connect where and > > what > > > > knob settings I should use? > > > > > > > > Big thanks for any advice! > > > > > > > > - Oliver > > > > > > > > > > > > > > > > > > > > > >
2011-08-13 by Matt
It has been a VERY long time (1970's) since I worked on a 101, but don't recall why there might be interface problems - not to say that there aren't any. (I was New Jersey EML sales & service back then)
Other than the 1.2 V/oct issue, is it just that the Doepfer is not triggering the 101? I'm pretty sure that could be fixed by adjusting some resistor values in the 101.
Doug
--- In emlsynth@yahoogroups.com, Matt wrote:
>
> Hi Oliver,
>
> Initially it can be a source of frustration that the EML synths won't sync
> with anything else (it's partly the 1.2v/oct and partly the weirdness of the
> input jacks) but when you forget about that they're great synths, although I
> must admit mine is on eBay right now as I haven't used it since I put
> together my modular.
>
> Matt
>
> On 12 August 2011 12:53, Oliver Chesler wrote:
>
> > **
> >
> >
> > Hi Matt,
> >
> >; Thanks for the heads up. I thought that was the answer but I was double
> > checking. I'm using the Dark Time with some other gear (really nice little
> > unit). Too bad it won't work with the 101 too.
> >
> > - Oliver
> >
> > --- In emlsynth@yahoogroups.com, Matt wrote:
> > >
> > > Search the archives and you'll see the issue of compatibility between the
> > > EML synths and everything else discussed several times, however, the
> > short
> > > answer to your question is "no".
> > >
> > > On 12 August 2011 12:07, Oliver Chesler wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Hello Everyone,
> > > >
> > > > Is it possible to control an Electrocomp-101 with a Doepfer Dark Time
> > > > analog sequencer? I have both but can't seem to get it to work. If it
> > is
> > > > possible can someone tell me what cables I should connect where and
> > what
> > > > knob settings I should use?
> > > >
> > > > Big thanks for any advice!
> > > >
> > > > - Oliver
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>