Emax

if you send the dd disks to me i can do it for you

  ----- Original Message ----- 
  From: julioho_53077@... 
  To: emax@yahoogroups.com 
  Sent: Tuesday, April 22, 2014 5:43 PM
  Subject: [emax] Looking for Emax OS 3.2 blank floppies


    
  Hi folks, I'm looking for around 20 floppies with the Emax I OS 3.2 version. Tried formatting blank floppies using EMXP but I didn't have any success. Since then my floppy drive has gone out. Anyone willing to help? Thanks

42 glastonbury crescent
walsall
ws3 2rf
united kingdom

jammie  

  ----- Original Message ----- 
  From: julioho_53077@... 
  To: emax@yahoogroups.com 
  Sent: Tuesday, April 22, 2014 11:54 PM
  Subject: Re: [emax] Looking for Emax OS 3.2 blank floppies


    
  Great!!! Thanks!!! What is your address?

is os 3.2 for first edition emax only ? or is it se/hd & plus verison compatible also ?

what is the latest os for plus version with scsi port on rear ?




________________________________
 Från: "julioho_53077@...m" <julioho_53077@...>
Till: emax@yahoogroups.com
Skickat: tisdag, 22 april 2014 18:43
Ämne: [emax] Looking for Emax OS 3.2 blank floppies



 
Hi folks, I'm looking for around 20 floppies with the Emax I OS 3.2 version.  Tried formatting blank floppies using EMXP but I didn't have any success.  Since then my floppy drive has gone out. Anyone willing to help? Thanks

ok 3.2 is for non upgraded se machines it wont work in se or se/hd or plus os

it will come up as wrong os disc the same if you try and load a plus disk into a standard se with no scsi
the pre se models that were hd scsi compatible had there own os and only worked on that version

for scsi upgrades you needed to upgrade the machine to se first before you could load the scsi os version roms and a special pal chip for doing the scsi

the se added the spectral synthesis so any banks that contain that will not load into a os3.2 machine

the plus os was used for the emaxes that had the external port so you could change the port to an external device other than scsi id0 which is the only id that the emax can boot from  this allowed more than 1 scsi device on the bus and so it allowed you to change the id so you could load banks from any device id that had a scsi device attached up to 7 devices to the 8 device id network there is always one taken by the controller

thats why you can only attach 7 devices 

each manufacturer used there own device id some use 7 some use 3 like the ensoniqs

but eve3n though you had the plus os when you switch the machine off the external scsi id of your device is not kept and so when switch on it reverts back to scsi id0 for booting the emax os from scsi device

this is a problem if your thinking of boot your machine from an external zip drive which can only use scsi id5/6 so you would need to always have a floppy to boot your machine if using such devices

if you have an internal scsi zip drive with a external case then these can be set to scsi id0

if you have the version of femax with the external 25db scsi port you will need the scsi plus os disks  

  ----- Original Message ----- 
  From: KW 
  To: emax@yahoogroups.com 
  Sent: Wednesday, April 23, 2014 4:05 PM
  Subject: SV: [emax] Looking for Emax OS 3.2 blank floppies


    

  is os 3.2 for first edition emax only ? or is it se/hd & plus verison compatible also ? 

  what is the latest os for plus version with scsi port on rear ?






------------------------------------------------------------------------------
  Från: "julioho_53077@..." <julioho_53077@...>
  Till: emax@yahoogroups.com 
  Skickat: tisdag, 22 april 2014 18:43
  Ämne: [emax] Looking for Emax OS 3.2 blank floppies



    
  Hi folks, I'm looking for around 20 floppies with the Emax I OS 3.2 version. Tried formatting blank floppies using EMXP but I didn't have any success. Since then my floppy drive has gone out. Anyone willing to help? Thanks

thank you very much both Ted and Jammie for this information! i've bought two "plus" keyboard versions so i needed to sort things out here. your information has been very useful! again thank you very much!

/k




________________________________
 Från: jammie <jammie.emma@...>
Till: emax@yahoogroups.com
Skickat: onsdag, 23 april 2014 19:52
Ämne: Re: [emax] Looking for Emax OS 3.2 blank floppies



 

ok 3.2 is for non upgraded se machines it wont work
in se or se/hd or plus os
 
it will come up as wrong os disc the same if you
try and load a plus disk into a standard se with no scsi
the pre se models that were hd scsi compatible had
there own os and only worked on that version
 
for scsi upgrades you needed to upgrade the machine
to se first before you could load the scsi os version roms and a special pal
chip for doing the scsi
 
the se added the spectral synthesis so any banks
that contain that will not load into a os3.2 machine
 
the plus os was used for the emaxes that had the
external port so you could change the port to an external device other than scsi
id0 which is the only id that the emax can boot from  this allowed more
than 1 scsi device on the bus and so it allowed you to change the id so you
could load banks from any device id that had a scsi device attached up to 7
devices to the 8 device id network there is always one taken by the
controller
 
thats why you can only attach 7 devices
 
each manufacturer used there own device id some use
7 some use 3 like the ensoniqs
 
but eve3n though you had the plus os when you
switch the machine off the external scsi id of your device is not kept and so
when switch on it reverts back to scsi id0 for booting the emax os from scsi
device
 
this is a problem if your thinking of boot your
machine from an external zip drive which can only use scsi id5/6 so you would
need to always have a floppy to boot your machine if using such
devices
 
if you have an internal scsi zip drive with a
external case then these can be set to scsi id0
 
if you have the version of femax with the external
25db scsi port you will need the scsi plus os disks  
----- Original Message -----
>From: KW
>To: emax@yahoogroups.com
>Sent: Wednesday, April 23, 2014 4:05  PM
>Subject: SV: [emax] Looking for Emax OS  3.2 blank floppies
>
> 
>is  os 3.2 for first edition emax only ? or is it se/hd & plus verison  compatible also ?
>
>what is the latest os for plus version with scsi
  port on rear ?

>
>
>
>
>
>
>________________________________
> Från: "julioho_53077@..." <julioho_53077@...>
>Till: emax@yahoogroups.com
>Skickat: tisdag, 22 april 2014  18:43
>Ämne: [emax] Looking  for Emax OS 3.2 blank floppies
>
>
>
> 
>Hi folks, I'm looking for around 20 floppies with the Emax I OS 3.2  version. Tried formatting blank floppies using EMXP but I didn't have any  success. Since then my floppy drive has gone out. Anyone willing to help?  Thanks
>
>