Re: [emax] Re: Error & Question about Sampling
2004-01-22 by John Silveria
is it the SE HD upgrade or the SE ? If you are trying to install a SE HD OS on a non-HD system your going to run into trouble. I m sure Rob can correct me on
Messages
Browse messages
Page 200 of 236 · 11758 messages matched
Re: [emax] Re: Error & Question about Sampling
2004-01-22 by John Silveria
It sounds like you had an SE HD diskette so it was erroring thinking it was going to find bank 01 (the hard drive) once you got a plain non-HD SE diskette then
I'm back!
2004-01-22 by John Silveria
My apologies to everyone if my absence has been noticed, though it probably hasn t, ever since I moved to Virginia and got Direcway last April I have had
Re: [emax] Re: Error & Question about Sampling
2004-01-22 by elmacaco
How did the SE update from the web file work? I tried it on a friend s machine and it started flashing on all LED s. Ed ... From: phonophobie To:
Re: Error & Question about Sampling
2004-01-22 by phonophobie
well, i dont have a hd ( avctally i was thinking about getting me a zipdrive maybee soon ) the problem i had was about that se disk used - i downloaded it from
Re: [emax] SAVE to Bank = Error
2004-01-22 by Brian Ronn
Hi Phono If your Emax has a harddrive installed you should be able to save your work on bank 01 which is the first bank on the harddrive. If you can t then the
SAVE to Bank = Error
2004-01-21 by phonophobie
hi, i got a problem here with saving my work to disk. i just made a multisample preset of my arp omni strings - after i sampled all i tried to save with
sds transfering
2004-01-19 by Humberto Fierro
I Adquired an EmaxII without nothing of disk. The simpton are the next: It has Hard Drive 506 Mb with few sounds (piano,bells,guitar) I tried format a ds-dd
no voices from my emaxii
2004-01-19 by Humberto Fierro
No ... Do You Yahoo!? Yahoo! Net: La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. [Non-text portions of this message have been removed]
A/D converters inside the Emax 1?
2004-01-18 by bassmeter
Hi, I think one or more of the voices in my Emax 1 are out. Every time I make a second or fourth sample, their sound is barely audible. Actually, I was
Re: [emax] Re: Internal HD Install
2004-01-15 by Brian Ronn
Hi Homershines You could do like I ve done with the harddrive installation in the Emax II. Insted of tracking down the right brackets you could just buy a 5
Re: Internal HD Install
2004-01-15 by homershines
Thanks Matt & Brian. Found it. It was hiding in the shadows smoking what looked to be a joint. I called the proper authorities and will connect it to the new
Parts
2004-01-13 by jon
This is a mono Emax II with external scsi drive 105MB cartidges(3 or 4. EMX program and factory sound for Emax I and II. Power supply in good order, possible
Re: [emax] Internal HD Install
2004-01-13 by Matt Ferrari
... From: homershines To: Sent: Monday, January 12, 2004 8:26 PM Subject: [emax] Internal HD Install ... You
[emax] online tutorial?
2004-01-13 by thelawof5s@...
Hi. I have been to emulator archive and I have the original instruction manual for them. I have spent a decent amount of time trying to decifer the thing and
Re: [emax] Internal HD Install
2004-01-13 by Brian Ronn
Hi Homershines There should be a 50-pin connector close to the edge of the mainboard next to where the harddisc should be seated. Best regards Brian
Internal HD Install
2004-01-13 by homershines
I have an Emax II tthat never had the internal HD. I ve decided to finally do it. I have the case open, and I see the internal power supply cable, the brackets
Re: [emax] Burning an Emax Cd
2004-01-10 by elmacaco
Well the Emax I Plus is Scsi. and I have one. Certain Emax HD s can be upgraded to SCSI, check the emulator archives. But I meant about the translator free
Re: [emax] Burning an Emax Cd
2004-01-10 by Garth Hjelte
... Yes, but since the Emax I was never SCSI, I don t think it applies. Garth Hjelte Sampler User
Re: [emax] Burning an Emax Cd
2004-01-08 by elmacaco
Does this work with emax I banks? ... From: Garth Hjelte To: Sent: Wednesday, January 07, 2004 1:27 AM Subject:
whats your headroom set at?
2004-01-07 by Matt Ferrari
Really just a curiosity poll. I know I need a different number as my little Roland MA-8 personal monitors get a nasty crackling thru them on some of the hotter
Re: [emax] Burning an Emax Cd
2004-01-07 by Garth Hjelte
I can suggest an easier alternative. If you have a PC, download Translator Free. It can view Emax hard drives (or any Emu hard drive), and allows you to:
Re: [emax] Thanks for the advise
2004-01-06 by Humberto Fierro
i created disks with high density 3.5 floppy do you have an hard disk inside your emax? jon wrote: I ve tried to format using the EMX
Re: [emax] Thanks for the advise
2004-01-06 by Humberto Fierro
i created disks with high density 3.5 floppy do you have an hard disk inside your emax? jon wrote: I ve tried to format using the EMX
Re: [emax] Thanks for the advise
2004-01-06 by John Silveria
It definitely can not format in a DOS BOX. You get the exact error we all do to do Windows not allowing EMX access to the sectors it needs. ...
Thanks for the advise
2004-01-06 by jon
I ve tried to format using the EMX progrom in a DOS box within Win 98 SE but can t seem to complete due to sector read errors at about 99%. I m not certain if
Re: [emax] Burning an Emax Cd
2004-01-06 by Pedro H
Just saving my zip banks into Cds to make it easier to swap them. Regards. Pedro. ... From: Bob Conner To: Sent:
Re: [emax] emx program
2004-01-06 by John Silveria
Create a directory on your computer s hard drive called EMX. Download EMX and extract it to that directory. Download the sound bank(s) you want and extract
emx program
2004-01-06 by jon
Could any one post a step by step for proper use of the EMX utility?
Re: [emax] Burning an Emax Cd
2004-01-06 by Bob Conner
Are you trying to copy an existing Emax CD of sound banks or make a new one? Bob ... __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter
Re: [emax] Burning an Emax Cd
2004-01-06 by Skip Spoula
Pedro take a look on the Emulatorarchive under Emax then CDROMS and you should follow those instructions carefully. I wrote those about 2 years ago when I was
Re: [emax] Burning an Emax Cd
2004-01-05 by John Silveria
An Emax wouldn t be able to use a CD-ROM drive and I don t think it would work if you put it in a SCSI chain with a PC, I think it would lock-up. If you have
Re: [emax] RS-422 port
2004-01-05 by John Silveria
there aren t any PC programs that use this port currently. ... **************************John Silveria II**************************** AIM & Yahoo! Messenger:
RS-422 port
2004-01-05 by jon
Does this port work with PC platform as well as Mac? Are there any reccomended programs for use with this port?
Burning an Emax Cd
2004-01-05 by Pedro H
Does anyone know how can we burn an Emax Cd? I was told that it was through a SCSI channel. (a SCSI blind channel, which I don´t know what means). And If
Re: Sound designer II for Atari
2004-01-05 by Bob Conner
Been going through my old emails... What ever happened with this? Thanks! Bob ... __________________________________ Do you Yahoo!? Find out what made the Top
Re: [emax] my samples
2004-01-02 by Matt Ferrari
welcome to the group pat, if your able to run the emx program, it is a good way to expand your sound library. It is a little bit frustrating to use as there
Re: Wavemax.rar in files section
2004-01-01 by rascalrevenge
I would like to know from the guy who uploaded it here (thx) if this works, because it asks for the original disk, so the copy protection is still valid ? A
(no subject)
2004-01-01 by homershines
aveMax for ATARI ST?? Message-ID: User-Agent: eGroups-EW/0.82 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1
New file uploaded to emax
2004-01-01 by emax@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the emax group. File : /072.zip Uploaded
RE: [emax] New member - Initial EMAX Q? + advice
2003-12-31 by Rob Keeble
Hi, 1) Emax memory cannot be expanded, but you can add a hard disk or ZIP100 if you have a model with internal or external SCSI connections (e.g HD models). 2)
New member - Initial EMAX Q? + advice
2003-12-30 by Luke Fowler
Hallo there re: Nope there isn t a way it s all proprietary. Unless your model already had a hard drive (which you could then modify it to support an external
my samples
2003-12-30 by patricia A murray
hi i m new to this group! after years and years i m finally getting back into music. i dusted off my old emax 1 and am enjoying rediscovering how much fun it
Re: New member - Initial EMAX Q? + advice
2003-12-30 by rob salazar
emax1 eh? I have one too ,and let me say, those things are 20+ year old technology - 512k was considered a good amount of memory in the mid-80s -your lucky
Re: [emax] New member - Initial EMAX Q? + advice
2003-12-30 by Jerry, Jerry, Jerry, Jerry La Rosa, La Rosa, La Rosa, La Rosa
Dear Luke, In absense of sample memory expansion chips, upgrades, etc. I have found that if you go through EACH sample and truncate (get rid of) unwanted or
Re: [emax] New member - Initial EMAX Q? + advice
2003-12-30 by John Silveria
... Nope there isn t a way it s all proprietary. Unless your model already had a hard drive (which you could then modify it to support an external Zip drive).
New member - Initial EMAX Q? + advice
2003-12-30 by Luke Fowler
Hello There I am new to the list and have just purchased a EMAX 1 keyboard s/h - I believe it to be the standard Keyboard model as it only has 524288 k when
Re: [emax] Re: TRADE/SWAP & EMAX Programming
2003-12-29 by John Silveria
BTW it is silveria not silvera :) try here: http://personales.ciudad.com.ar/dhpb/ http://www.seib.synth.net/emax/banks.htm **************************John
Re: TRADE/SWAP & EMAX Programming
2003-12-23 by phonophobie
that silvera site has no downloads as far i can see... but i found another site...don´t remember the name... with many factory banks... found via google of
Re: a cool little emaxSE jam mp3
2003-12-23 by jrbslc@...
Hi there, Just wanted to let you know I loved that SE Jam.