Emax

Hi Jammie,

My display already had screws and nuts. Guess I was lucky :)

D.


On Feb 9, 2013, at 11:05 AM, Daniel Baum <daniel@...> wrote:

> Thanks.
> 
> RAM board and main board are out. Now removing keyboard.
> 
> It's worse than dismantling a Mac...
> 
> 
> D.
> 
> 
> On Feb 9, 2013, at 10:50 AM, "jammie" <jammie.emma@...> wrote:
> 
>> its the same screen board but you need to remove the the keyboard the mainboard and the ram board to get to the screen board
>> 
>> under neath you need to add some srews and nuts to hold the lcd screen in place as the pins for the efoil are removed so that the screen is only fixed one side
>> 
>> ----- Original Message ----- 
>> From: Daniel Baum 
>> To: emax@yahoogroups.com 
>> Sent: Saturday, February 09, 2013 8:29 AM
>> Subject: [emax] Installing OLED screen in Emax II keyboard.
>> 
>> Hi all,
>> 
>> I am installing the OLED discplay in my Emax II keyboard.
>> 
>> I have watched Ted's video, which explains the process on the Emax I.
>> 
>> My Emax II has a large memory expansion board over the main board. Do I need to remove this separately or can it come out as one unit with the logic board?
>> 
>> Are there any other differences between the Emax I and Emax II that I should know about?
>> 
>> Tks,
>> 
>> Daniel
>> 
>> [Non-text portions of this message have been removed]
>> 
>> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Emax and Emax II User's Group Website
> 
> http://www.silveriafamily.comYahoo! Groups Links
> 
> 
>