Emax

Thanks.
The cost for EmuSer parts slightly depends on the supplier; but especially the parts shipping costs can be annoying (not many suppliers can provide all parts, so typically multiple shipments are involved). 
I would say between 30 and 40 EUR.
The time to build the thing should not be under-estimated (hours !), especially due to the required mechanical processing of the case and the print board. Building it on an experimental board can be done very fast ;)

Regarding new stuff for the Emax, I haven't planned a lot.
Nothing at the hardware side. On the software side, EMXP v2.12 will contain bank construction functions for all supported samplers including Emax-I and Emax-II (current version v2.11 only supports construction of Emulator-I banks). Probably also full floppy disk images will be supported (besides EMX, EM1, EM2 files). And there will be some enhancements in the conversion engine for the Emax-I and Emax-II.
EMXP v2.12 will contain some other new features, but these will not be unique for Emax samplers ;)

///E-Synthesist



--- In emax@yahoogroups.com, "freddy1771994" <freddy1771994@...> wrote:
>
> Hi Kris,
> 
> just want to ask the expert. How much do you think do the emuser parts cost all in all?
> 
> I'm wondering if you have any exciting new emax related hardware or software (updates...) plans? 
> 
> And furthermore I just want to thank you for all your work concerning the emax (emxp...). You really keep the instrument alive!
>