Emax

Hey E-Synthesist,

i am about to build an Emuser for my newly acquired EII. Anyways i am so busy to recap other samplers and upgrade displays to VFD ones i was wondering if you would build one for me, so i could save myself a lot of time. I would pay for it of course.

Best
André

--- In emax@yahoogroups.com, "esynthesist" <esynthesist@...> wrote:
>
> The labelling/coding system of these ICs can evolve in time, that's why I only mentioned the basic "root" identifier of the RS422 ICs.
> But since the EmuSer uses DIP packages, the UA9638CP and UA9637ACP can certainly be used; FYI these are the ones that I always use when I build EmuSers.
> 
> If you intend to use the EmuSer primarily for transferring complete BANKS between a PC and the Emax/Emax-II, you should consider using SCSI drives attached to the Emax instead of using the EmuSer. Transferring banks through RS422 takes between 30 and 40 seconds; SCSI is much faster. Moreover, if you are using an Emax-II, the banks can only be transferred from PC to Emax-II through RS422 (not the other way around) and the bank should be a 512K compressed bank (so not e.g. a 16 bit 2MB bank). Both restrictions are imposed by the Emax-II operating system, not by the EmuSer or EMXP.
> 
> However, if you intend to use the EmuSer for transferring individual samples (WAV files), it can be an attractive alternative for MIDI, because it's much faster.
> 
> ///E-Synthesist 
> 
> 
> --- In emax@yahoogroups.com, "philippe.69" <philippe.69@> wrote:
> >
> > !!!!   you can not send more than 512kb as a floppy disk
> > 
> > emuser is designed for the emulator II it works like a disk drive no
> > interest on an Emax
> > 
> >  
> > 
> > De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
> > freddy1771994
> > Envoyé : mercredi 4 juillet 2012 15:02
> > À : emax@yahoogroups.com
> > Objet : [emax] Emuser Parts List
> > 
> >  
> > 
> >   
> > 
> > Hi,
> > I'm currently searching the parts for the emuser which is not that easy and
> > cheap if you live in Germany.
> > I have the following - hopefully not stupid - questions:
> > 
> > In the manual, the part number of the "UA9638C" is obviously not complete. I
> > checked mouser.com
> > (http://eu.mouser.com/Search/Refine.aspx?Keyword=UA9638C). It shows many
> > different UA9638's. Which one is the one I need?
> > 
> > Same with the "UA9637AC"
> > (http://eu.mouser.com/Semiconductors/_/N-5gcb?Keyword=UA9637AC
> > <http://eu.mouser.com/Semiconductors/_/N-5gcb?Keyword=UA9637AC&FS=True>
> > &FS=True). Which one do I need?
> > 
> > Does anyone has experiences, is it a cool thing and how much did it cost you
> > all in all?
> > Thank you!
> > Freddy
> > 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>