Emax

A lot of this info is in a database on the group. But I use MCR-5A PC Card adapters bought off ebay and SanDisk SD and Transflash that are 32MB in size.

You can also use these- I have used them successfully:
http://www.ebay.com/itm/370301814447?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

On Nov 20, 2011, at 9:28 PM, ditabeardmemo wrote:

Hi Ted:

Thanks for the input. Can you recommend a CompactFlash card brand/size that is known to be compatible with the Emax?

Thanks,
DBM

--- In emax@yahoogroups.com, Ted Summers <djtbs1@...> wrote:
>
> #1 - put it in a PC with SCSI card and try to format the card there.
> Also- you should be able to see the firmware revision that is on the drive and that can help determine / verify the drive is read/write firmware.
> 
> #2- I don't know that an Emax 1 will format a 512MB. The largest I ever tried was 256MB.
> I don't know what that other D2 flashdisk is... it could be possible that neither of the 2 flash you are trying to use will work properly.
> When I search D2 and flashdisk everything I get is in Gigabyte sizes. These drives don't support a card above 2GB. 
> 
> 
> 
> On Nov 20, 2011, at 8:25 PM, ditabeardmemo wrote:
> 
> Hi Scott:
> 
> I do not know for certain whether the Emax's internal 50-pin SCSI connection is working correctly. When I received this machine, the internal hard drive was dead and the Emax would not boot from it.
> 
> That said, the PCD 50B does seem to respond when I try to format a card. The green light on the front lights up when the formatting begins. The problem is that the formatting never finishes.
> 
> Best,
> DBM
> 
> --- In emax@yahoogroups.com, Scott Stanley <scartattack@> wrote:
> >
> > Have you verified that your SCSI port still works with any drive? That
> > would at least tell you if it is drive or sampler related.
> > 
> > -s*
> > 
> > On 2011-11-20, at 9:03 PM, ditabeardmemo <brandt@> wrote:
> > 
> > 
> > 
> > I recently picked up an Emax SE HD keyboard with the intention of
> > installing a slim floppy and PCD 50B, as the original internal Miniscribe
> > hard drive was dead. I installed the PCD 50B, but I can't get it to
> > correctly format a Compact Flash card. Every time it produces an "HD Format
> > Error" or freezes on "Formatting HD..." indefinitely. In one case, the unit
> > froze while it was saving a bank to the formatted disk.
> > 
> > Here is what I've checked thus far:
> > 
> > 1. The machine boots normally from a floppy disk with the PCD 50B
> > installed, and all functions appear to work.
> > 
> > 2. When formatting, I tried a floppy disk with the Plus OS 4.0 (from
> > E-Synthesist's Web site) and an original HD OS 1.1 that came with the unit.
> > 
> > 3. I tried to format a SanDisk 512 MB card (connected via a PCMCIA adapter)
> > and a SanDisk D2 Flashdisk 20 MB card, but neither worked.
> > 
> > 4. I confirmed that the SCSI cable has data line 1 (red stripe) lined up
> > with pin 1 on the PCD 50B.
> > 
> > 5. The only jumper on the PCD 50B is for termination. I have all other
> > jumpers removed. This means the device is set to SCSI ID 0 and "Write
> > Protect" is off.
> > 
> > I'm out of ideas for what to try next. Any thoughts?
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]