Emax

Opened it up and took another look.  Yea sure enough the springs are hooked in and just pop right out.  Don't know how I missed that the first time.. thanks!

Another problem I've noticed... the data slider will jump around between values sometimes.  Especially notice when changing tempo.  Could probably use a little cleaning I'm guessing, what's the best way to go about cleaning them?

Cheers,
andy

--- In emax@yahoogroups.com, Patrick R <designlord@...> wrote:
>
> Hi,
> 
> 
>  This is pretty simple. From what I recall there are four screws holding the keyboard in place. Remove those and you can flip the keyboard towards the mainboard and the springs I believe are hooked into the key and soldered into the keyboard circuit board.
> 
> 
> 
> ________________________________
> From: andykinnetz <akinnetz@...>
> To: emax@yahoogroups.com
> Sent: Tue, December 15, 2009 6:58:23 AM
> Subject: [emax] Replacing keys
> 
>   
> Is anyone familiar with the procedure on replacing one of the emax keys?  As far as removing the spring and whatnot?
> 
> 
>  
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>