Emax

Hi,


 This is pretty simple. From what I recall there are four screws holding the keyboard in place. Remove those and you can flip the keyboard towards the mainboard and the springs I believe are hooked into the key and soldered into the keyboard circuit board.



________________________________
From: andykinnetz <akinnetz@...>
To: emax@yahoogroups.com
Sent: Tue, December 15, 2009 6:58:23 AM
Subject: [emax] Replacing keys

  
Is anyone familiar with the procedure on replacing one of the emax keys?  As far as removing the spring and whatnot?


 


      

[Non-text portions of this message have been removed]