Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Message

Re: [emax] high whine in power supply

2009-02-25 by nung242

Its coming directly from the PSU. 

Jason V

--- On Tue, 2/24/09, sm papke <mothrecords@...> wrote:
From: sm papke <mothrecords@...>
Subject: Re: [emax] high whine in power supply
To: emax@yahoogroups.com
Date: Tuesday, February 24, 2009, 4:19 PM











    
            

the whining sounds is audible directly from the PSU, or only when the units outputs are in use? I would definitely re-cap the PSU if it is still stock.

cheers, emulator_island



--- On Tue, 2/24/09, nung242 <nung242@yahoo. com> wrote:



> From: nung242 <nung242@yahoo. com>

> Subject: Re: [emax] high whine in power supply

> To: emax@yahoogroups. com

> Date: Tuesday, February 24, 2009, 12:31 PM

> 

> 

> 

> 

> 

> 

> 

> 

> 

> 

>  

> 

> 

> 

> 

> 

> 

>     

>             It has the kit inside for the HD, but I do

> not have one hooked up yet. The only thing I have done is

> take and old internal 3.5 floppy drive and replace the one

> that was originaly there, but it was whining before I did

> that.

> 

> Thanks!

> 

> Jason V

> 

> 

> 

> --- On Tue, 2/24/09, sm papke <mothrecords@

> yahoo.com> wrote:

> 

> From: sm papke <mothrecords@

> yahoo.com>

> 

> Subject: Re: [emax] high whine in power supply

> 

> To: emax@yahoogroups.

> com

> 

> Date: Tuesday, February 24, 2009, 10:23 AM

> 

> 

> 

> hi, is there an HD installed on your EMAX II?

> 

> 

> 

> emulator_island

> 

> 

> 

> --- On Tue, 2/24/09, nung242 <nung242@yahoo. com>

> wrote:

> 

> 

> 

> > From: nung242 <nung242@yahoo. com>

> 

> 

> 

> > Subject: [emax] high whine in power supply

> 

> 

> 

> > To: emax@yahoogroups. com

> 

> 

> 

> > Date: Tuesday, February 24, 2009, 10:18 AM

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> >  

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> >     

> 

> 

> 

> >             Hello, 

> 

> 

> 

> > 

> 

> 

> 

> >  When I turn on my emax II keyboard - the power

> supply

> 

> 

> 

> > whines loudly for about 5 minutes before quieting

> down. Does

> 

> 

> 

> > this mean the power supply is on the way out? If so,

> where

> 

> 

> 

> > would I get a new one? Would it be cheaper to have the

> power

> 

> 

> 

> > supply repaired?

> 

> 

> 

> > 

> 

> 

> 

> > Thanks for any help or suggestions!

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > Jason V

> 

> 

> 

> > 

> 

> 

> 

> > the band TV 

> 

> 

> 

> > 

> 

> 

> 

> >  http://www.youtube.

> 

> 

> 

> > com/sexlustlies

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > [Non-text portions of this message have been removed]

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> >  

> 

> 

> 

> > 

> 

> 

> 

> >       

> 

> 

> 

> > 

> 

> 

> 

> >     

> 

> 

> 

> >     

> 

> 

> 

> > 	

> 

> 

> 

> > 	 

> 

> 

> 

> > 	

> 

> 

> 

> > 	

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 	

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 	

> 

> 

> 

> > 	

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> > 	

> 

> 

> 

> > 	

> 

> 

> 

> > 	

> 

> 

> 

> > 

> 

> 

> 

> > 

> 

> 

> 

> 	

> 

> 	 

> 

> 	

> 

> 	

> 

> 

> 

> 	

> 

> 

> 

> 	

> 

> 	

> 

> 

> 

> [Non-text portions of this message have been removed]

> 

> 

> 

> 

>  

> 

>       

> 

>     

>     

> 	

> 	 

> 	

> 	

> 

> 

> 

> 

> 	

> 

> 

> 

> 

> 	

> 	

> 

> 

> 	

> 	

> 	

> 

> 




 

      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.