Emax

Hey Every body
 
 I need a drive for my emax se.So i was hoping the drive in the classic macintosh would work in the keyboard???any info on this would help ALOT.
 
THANX

--- On Wed, 11/19/08, Ted Summers <djtbs1@gmail.com> wrote:

From: Ted Summers <djtbs1@...>
Subject: [emax] Emax SCSI Upgrade chip kits - 11 available
To: emax@yahoogroups.com
Date: Wednesday, November 19, 2008, 1:51 AM






Installation Tips / Recommendations now available at:
http://djtbs1. spaces.live. com/default. aspx

Pictures of the Rev 2 and 3 Emax boards at above link so you know what 
you are looking for to determine whether the upgrade will work in your 
Emax or Baldwin IKE.

The same rules apply that did before as per the SCSI upgrade docs at 
Emulator Archive- Instructions here:
http://www.emulator archive.com/ assets/PDF/ Emax%20Plus% 20SCSI%20Retro% 20Instructions. pdf

a rev 3 board will take the chips- no board mods.....
a rev 2 board needs modified
a rev1 cannot be upgraded.
I have full Chipsets in stock. The cost of the kit is $50 USD + 
shipping.

THIS SET DOES NOT INCLUDE A HARD DISK or the- but can be used with 
SCSI Zip,
SCSI Compact Flash / SD, SCSI hard drive, etc. IDE CF works via an
ACARD SCSI adapter.....

This set does not include an "external SCSI adapter board", or 
external connector.
To provide that would increase the cost of the kit.

Each set of chips will be tested in my Emax to verify operation prior 
to shipping.

Kit also includes:
28-pin socket for the EPROM and some connect wire for the mods that 
need to be made.
HD-capable Emax OS disk (either SE or Non-SE)

You will need-
A SCSI drive
A mounting plate (make one or a 5 1/4 to 3 1/2 in drive bay converter 
kit / rails may work for this purpose also.
A power splitter - I am not including this as I have different reports 
as to whether this is needed for all emax.
Soldering skills
The PDF from Emulator Archive on how to do the modification.

I need the following information from those ordering:
Is your emax rev 2 or rev 3 (so I know whether I need to supply the 
socket)
Is your emax SE or Non-SE? (So I supply you the right disk).

Regards,
Ted Summers

Paypal accepted: djtbs1@gmail. com

[Non-text portions of this message have been removed]

 














      

[Non-text portions of this message have been removed]