Emax

Error 167, code 5 is the errormessage indicating that the OmniFlop 
driver has not been licensed yet for use with EMXP(N).
You don't have to get a license for EMAX disks specifically, but you 
do have to ask for an EMXP license. This can be done with the already 
mentioned 'get a license' button in the OmniFlop wizard.

I checked if there are some problems with the licensing procedure on 
OmniFlop's server by installing EMXP and OmniFlop on a fresh PC.
The licensing worked fine, I didn't encounter any problems at all...

Did you find the problem yet ? Maybe you should retry the whole 
installation procedure, step by step as it is explained in the EMXP 
manual ? If the error keeps returning, you could send an e-mail to 
Jason Watton or to me, mentioning the e-mail address you entered in 
the online license screen...

///E-Synthesist 

--- In emax@yahoogroups.com, "Roland S-50" <rolands50@...> wrote:
>
> Hi there,
> 
> Thanks for the response. However, I have already registered 
OmniFlop and
> entered the license code... :-(
> 
> Mike.
> 
> On 10/01/2008, lieven van pee <liefke84@...> wrote:
> >
> >
> >
> > you have to get a license for the omniflop emax driver. If you run
> > Omniflop there is a box called 'license' or 'register' (can't 
remember
> > exactly) click that one and select the emax driver. you'll have 
to fill a
> > form and after registering you will receive a mail with the 
licensing code.
> > hope this helps
> > To: emax@yahoogroups.com <emax%40yahoogroups.com>
> > From: rolands50@... <rolands50%40gmail.com>
> > Date: Wed, 9 Jan 2008 13:17:39 +0000
> > Subject: [emax] EMXP 2.04.1 problem?
> >
> > Hi All,
> >
> > I'm just about to lay my hands on an Emax (version 1) and I 
thought
> >
> > I'd prepare a few floppy disk s to use on it.
> >
> > I'm trying to use EMXP, version 2.04.1 and I have the OmniFlop 
driver
> >
> > 2.01j installed (the Omniflop program appears to work fine), but 
when
> >
> > I try and use EMXP to write an .EM1 disk image to a 720K DD floppy
> >
> > disk ("Copy EMX Image File to Floppy Disk") I get the following 
error:
> >
> > =====
> >
> > Errorcode 167
> >
> > The OmniFlop driver can not be initialised. Errorcode is 5
> >
> > =====
> >
> > I can't figure out what the problem is. I've tried rebooting in 
safe
> >
> > Mode (WinXP SP2) with no luck...
> >
> > Had anyone else run into problems with EMXP?
> >
> > Cheers,
> >
> > Mike.
> >
> > __________________________________________________________
> > Via je PC gratis je vrienden hun PC bellen
> > http://get.live.com/messenger/overview
> >
> > [Non-text portions of this message have been removed]
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>