Emax

It doesn't do any harm to periodically unplug/replug the ribbon connections
in both the Emax and Emax II.
I've had strange symptoms happen to both especially when I've not used them
for awhile.
The last time my Emax II's sliders stopped working, calibration values were
silly and didn't respond to new settings.
I just unplugged/replugged evertyhing I could see inside, and everything returned
to normal !

Lyn

  ----- Original Message ----- 
  From: Chip 
  To: emax@yahoogroups.com 
  Sent: Monday, February 26, 2007 11:37 AM
  Subject: [emax] Re: Help - Emax 1 PSU on failing


  hi... something like taht happens to me once

  but, that was because i've unplugged the board cable (the biggest hd-
  like cable from board to board)and when i plugged on , the psu becomes 
  to make a fast click noise.

  my solution to the problem was remove that cable and put it on again. 
  and the noise stops and emax turn on ok.

  good luck with that

  chip



   

[Non-text portions of this message have been removed]