I haven't been able to write a working OS disk with EMX since I made a Plus OS once disk years ago. I can burn banks OK but all the OS's get the error you get,
Try burning the plus OS, that's the only one I could ever burn successfully.
I have a bunch of Emax disks with various OS's and that's what I use to make OS disks for others.
you could make the SE upgrade with that OS though.
----- Original Message -----
From: peter_vh01
To: emax@yahoogroups.com
Sent: Sunday, May 28, 2006 3:09 PM
Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths...
Actually, I decided to go ahead, and I installed DOS 6.22 onto an old
box I had kicking around.
Ran the software, created the disk, but when I run the disk I first
get the message 'BAD BANKS' and then 'WRONG SOFTWARE'. Anyone else
ever experience this? I took the SE software off of the Files section
on this group.
- Peter
--- In emax@yahoogroups.com, "elmacaco" <elmacaco@...> wrote:
>
> I can make you an SE upgrade disk, if you like, it's $25 for the
trouble.
>
> The good news then is you can run the Plus OS and have all the Emax
features.
>
>
> ----- Original Message -----
> From: peter_vh01
> To: emax@yahoogroups.com
> Sent: Sunday, May 28, 2006 12:18 PM
> Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other
Synths...
>
>
> Ah, no according to this site,
> http://www.silveriafamily.com/emax/emax_overview.html HD 1.1 came out
> before the SE.
>
> I don't really feel like going through the effort of setting up a DOS
> machine with a FAT drive to get an SE install disk. Is it truly not
> possible to send arpeggiated sequences through the midi out with the
> version I am running? Or perhaps it's just a setting somewhere I need
> to adjust?
>
> - peter
>
> --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> >
> > OK,
> >
> > So how can I find out if my EMAX has the SE revision on it?
According
> > to what it says under Master --> Special, my HD has the version
"Emax
> > HD Rev. 1.1" installed. Is this the SE version? According to some
> > websites I was looking at, it should say "Emax SE HD Rev
1.1"..perhaps
> > there just wasn't enough space on the display to include the SE?
> >
> > - Peter
> >
> > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
> > >
> > > Err, great find then for me and you´re right, just tried it,
works on
> > > both my Emax´ with SE and Plus Software, honestly I can´t remind
> > > reading that this was obviously changed with these
software-versions,
> > > "shocking" news ;-), I never tried this with them until A
MOMENT AGO,
> > > just because I am sure on Emax 1 Software version 3.2 this did NOT
> > > work, right ? If anyone can please confirm. In MASTER menu >
Special >
> > > MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated
notes
> > > running, so on my old non SE- Emax in the same menu you could
only see
> > > the note transmitted you pushed if I remember correctly, but
not the
> > > arpeggiated notes (inbetween). Let me know someone with OS 3.2
if I´m
> > > right then it´s working only on SE and Plus OS, and thx again
for that
> > > info.
> > >
> > > RR
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote:
> > > >
> > > > err, that's odd then, becuase i'm using my emax as a master
> > > controller (via atari ST
> > > > cubase) to record arpeggiated lines to my microkorg & jx3p
without
> > > any problem. Cubase
> > > > records all arpeggiated notes with no problem and plays them
back.
> > > Also works if directly
> > > > connected to external synth.... It does send arpeggiator to
> midi out.
> > > >
> > > > Cheers
> > > >
> > > > Simon
> > > >
> > > >
> > > >
> > > > --- In emax@yahoogroups.com, "rascalrevenge"
<rascalrevenge@> wrote:
> > > > >
> > > > > No, if doing so you´d still need to have the arpeggiator
turned
> > on and
> > > > > running into the same problem, the damn arp. just doesn´t
transmit
> > > > > arpeggiated notes out, not even internal, whoever made that
> > decission
> > > > > @ E-mu back then.... &%$§"!.
> > > > >
> > > > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and
> > transmits
> > > > > over MIDI, even on an independent MIDI Channel.
> > > > >
> > > > > RR
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> > > > > >
> > > > > > Hmm, just a thought, might it be possible to record an
> arpeggiated
> > > > > > sequence with the sequencer, and play that back through
the midi
> > > port?
> > > > > >
> > > > > > - Peter
> > > > > >
> > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> > > > > > >
> > > > > > > Gah! So there is no possible way to use the Emax
Arpeggiator
> > > to drive
> > > > > > > other gear? What a shame!
> > > > > > >
> > > > > > > Anybody know of any affordable midi modules out there
that can
> > > do a
> > > > > > > good job of this?
> > > > > > >
> > > > > > > - Peter
> > > > > > >
> > > > > > > --- In emax@yahoogroups.com, "rascalrevenge"
<rascalrevenge@>
> > > wrote:
> > > > > > > >
> > > > > > > > Sadly Emax does NOT transmit arpeggiator-data to
it´s MIDI
> > OUT.
> > > > > > > >
> > > > > > > > RR
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@>
wrote:
> > > > > > > > >
> > > > > > > > > Hey guys,
> > > > > > > > >
> > > > > > > > > I'm trying to figure out to use the arpeggiator on my
> > > Emax-1 to
> > > > > > > > > control my Juno 106. Anybody know how to do this? I
> was just
> > > > > playing
> > > > > > > > > with the arpeggiator today, and had it functioning
> > wonderfully
> > > > > > on the
> > > > > > > > > Emax itself, just not sure how to control other
devices
> > > with it.
> > > > > > > > >
> > > > > > > > > Thanks!
> > > > > > > > >
> > > > > > > > > - Peter
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
>
>
>
>
>
> Emax and Emax II User's Group Website
>
> http://www.silveriafamily.com
>
>
>
> SPONSORED LINKS Electronic instrument Emax Synthesizer music
> Electronic music Music sampler Electronic musical instrument
>
>
>
------------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "emax" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> emax-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
------------------------------------------------------------------------------
>
>
>
> [Non-text portions of this message have been removed]
>
Emax and Emax II User's Group Website
http://www.silveriafamily.com
SPONSORED LINKS Electronic instrument Emax Synthesizer music
Electronic music Music sampler Electronic musical instrument
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "emax" on the web.
b.. To unsubscribe from this group, send an email to:
emax-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]Message
Re: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths...
2006-05-28 by elmacaco