Emax

I can make you an SE upgrade disk, if you like,  it's $25 for the trouble.

The good news then is you can run the Plus OS and have all the Emax features.


  ----- Original Message ----- 
  From: peter_vh01 
  To: emax@yahoogroups.com 
  Sent: Sunday, May 28, 2006 12:18 PM
  Subject: [emax] Re: Using the EMAX-1 Arpeggiator to control other Synths...


  Ah, no according to this site,
  http://www.silveriafamily.com/emax/emax_overview.html HD 1.1 came out
  before the SE.

  I don't really feel like going through the effort of setting up a DOS
  machine with a FAT drive to get an SE install disk. Is it truly not
  possible to send arpeggiated sequences through the midi out with the
  version I am running? Or perhaps it's just a setting somewhere I need
  to adjust?

  - peter

  --- In emax@yahoogroups.com, "peter_vh01" <petervh@...> wrote:
  >
  > OK,
  > 
  > So how can I find out if my EMAX has the SE revision on it? According
  > to what it says under Master --> Special, my HD has the version "Emax
  > HD Rev. 1.1" installed. Is this the SE version? According to some
  > websites I was looking at, it should say "Emax SE HD Rev 1.1"..perhaps
  > there just wasn't enough space on the display to include the SE?
  > 
  > - Peter
  > 
  > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
  > >
  > > Err, great find then for me and you´re right, just tried it, works on
  > > both my Emax´ with SE and Plus Software, honestly I can´t remind
  > > reading that this was obviously changed with these software-versions,
  > >  "shocking" news ;-), I never tried this with them until A MOMENT AGO,
  > > just because I am sure on Emax 1 Software version 3.2 this did NOT
  > > work, right ? If anyone can please confirm. In MASTER menu > Special >
  > > MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated notes
  > > running, so on my old non SE- Emax in the same menu you could only see
  > > the note transmitted you pushed if I remember correctly, but not the
  > > arpeggiated notes (inbetween). Let me know someone with OS 3.2 if I´m
  > > right then it´s working only on SE and Plus OS, and thx again for that
  > > info.  
  > > 
  > > RR  
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > 
  > > --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote:
  > > >
  > > > err, that's odd then, becuase i'm using my emax as a master
  > > controller (via atari ST 
  > > > cubase) to record arpeggiated lines to my microkorg & jx3p without
  > > any problem.  Cubase 
  > > > records all arpeggiated notes with no problem and plays them back. 
  > > Also works if directly 
  > > > connected to external synth....  It does send arpeggiator to
  midi out.
  > > > 
  > > > Cheers
  > > > 
  > > > Simon
  > > > 
  > > > 
  > > > 
  > > > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
  > > > >
  > > > > No, if doing so you´d still need to have the arpeggiator turned
  > on and
  > > > > running into the same problem, the damn arp. just doesn´t transmit
  > > > > arpeggiated notes out, not even internal, whoever made that
  > decission
  > > > > @ E-mu back then.... &%$§"!. 
  > > > > 
  > > > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and
  > transmits
  > > > > over MIDI, even on an independent MIDI Channel.
  > > > > 
  > > > > RR
  > > > > 
  > > > > 
  > > > > 
  > > > > 
  > > > > 
  > > > > 
  > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
  > > > > >
  > > > > > Hmm, just a thought, might it be possible to record an
  arpeggiated
  > > > > > sequence with the sequencer, and play that back through the midi
  > > port?
  > > > > > 
  > > > > > - Peter
  > > > > > 
  > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
  > > > > > >
  > > > > > > Gah! So there is no possible way to use the Emax Arpeggiator
  > > to drive
  > > > > > > other gear? What a shame!
  > > > > > > 
  > > > > > > Anybody know of any affordable midi modules out there that can
  > > do a
  > > > > > > good job of this?
  > > > > > > 
  > > > > > > - Peter
  > > > > > > 
  > > > > > > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@>
  > > wrote:
  > > > > > > >
  > > > > > > > Sadly Emax does NOT transmit arpeggiator-data to it´s MIDI
  > OUT. 
  > > > > > > > 
  > > > > > > > RR
  > > > > > > > 
  > > > > > > > 
  > > > > > > > 
  > > > > > > > 
  > > > > > > > 
  > > > > > > > 
  > > > > > > > 
  > > > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
  > > > > > > > >
  > > > > > > > > Hey guys,
  > > > > > > > > 
  > > > > > > > > I'm trying to figure out to use the arpeggiator on my
  > > Emax-1 to
  > > > > > > > > control my Juno 106. Anybody know how to do this? I
  was just
  > > > > playing
  > > > > > > > > with the arpeggiator today, and had it functioning
  > wonderfully
  > > > > > on the
  > > > > > > > > Emax itself, just not sure how to control other devices
  > > with it.
  > > > > > > > > 
  > > > > > > > > Thanks!
  > > > > > > > > 
  > > > > > > > > - Peter
  > > > > > > > >
  > > > > > > >
  > > > > > >
  > > > > >
  > > > >
  > > >
  > >
  >






  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 



  SPONSORED LINKS Electronic instrument  Emax  Synthesizer music  
        Electronic music  Music sampler  Electronic musical instrument  


------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS 

    a..  Visit your group "emax" on the web.
      
    b..  To unsubscribe from this group, send an email to:
     emax-unsubscribe@yahoogroups.com
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]