Emax

OK,

So how can I find out if my EMAX has the SE revision on it? According
to what it says under Master --> Special, my HD has the version "Emax
HD Rev. 1.1" installed. Is this the SE version? According to some
websites I was looking at, it should say "Emax SE HD Rev 1.1"..perhaps
there just wasn't enough space on the display to include the SE?

- Peter

--- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@...> wrote:
>
> Err, great find then for me and you´re right, just tried it, works on
> both my Emax´ with SE and Plus Software, honestly I can´t remind
> reading that this was obviously changed with these software-versions,
>  "shocking" news ;-), I never tried this with them until A MOMENT AGO,
> just because I am sure on Emax 1 Software version 3.2 this did NOT
> work, right ? If anyone can please confirm. In MASTER menu > Special >
> MIDI Analyzer > MIDI Data: Out I could now see the arpeggiated notes
> running, so on my old non SE- Emax in the same menu you could only see
> the note transmitted you pushed if I remember correctly, but not the
> arpeggiated notes (inbetween). Let me know someone with OS 3.2 if I´m
> right then it´s working only on SE and Plus OS, and thx again for that
> info.  
> 
> RR  
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> --- In emax@yahoogroups.com, "Simon_Owen" <iss049@> wrote:
> >
> > err, that's odd then, becuase i'm using my emax as a master
> controller (via atari ST 
> > cubase) to record arpeggiated lines to my microkorg & jx3p without
> any problem.  Cubase 
> > records all arpeggiated notes with no problem and plays them back. 
> Also works if directly 
> > connected to external synth....  It does send arpeggiator to midi out.
> > 
> > Cheers
> > 
> > Simon
> > 
> > 
> > 
> > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@> wrote:
> > >
> > > No, if doing so you´d still need to have the arpeggiator turned
on and
> > > running into the same problem, the damn arp. just doesn´t transmit
> > > arpeggiated notes out, not even internal, whoever made that
decission
> > > @ E-mu back then.... &%$§"!. 
> > > 
> > > My Yamaha AN1x has a great Arpeggiator and Pattern Seq. and
transmits
> > > over MIDI, even on an independent MIDI Channel.
> > > 
> > > RR
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> > > >
> > > > Hmm, just a thought, might it be possible to record an arpeggiated
> > > > sequence with the sequencer, and play that back through the midi
> port?
> > > > 
> > > > - Peter
> > > > 
> > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> > > > >
> > > > > Gah! So there is no possible way to use the Emax Arpeggiator
> to drive
> > > > > other gear? What a shame!
> > > > > 
> > > > > Anybody know of any affordable midi modules out there that can
> do a
> > > > > good job of this?
> > > > > 
> > > > > - Peter
> > > > > 
> > > > > --- In emax@yahoogroups.com, "rascalrevenge" <rascalrevenge@>
> wrote:
> > > > > >
> > > > > > Sadly Emax does NOT transmit arpeggiator-data to it´s MIDI
OUT. 
> > > > > > 
> > > > > > RR
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > --- In emax@yahoogroups.com, "peter_vh01" <petervh@> wrote:
> > > > > > >
> > > > > > > Hey guys,
> > > > > > > 
> > > > > > > I'm trying to figure out to use the arpeggiator on my
> Emax-1 to
> > > > > > > control my Juno 106. Anybody know how to do this? I was just
> > > playing
> > > > > > > with the arpeggiator today, and had it functioning
wonderfully
> > > > on the
> > > > > > > Emax itself, just not sure how to control other devices
> with it.
> > > > > > > 
> > > > > > > Thanks!
> > > > > > > 
> > > > > > > - Peter
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>