Emax

Press transpose, if you see it say SCSI ID under where it says transpose, you have the plus OS loaded.  Try hitting the number you have the zip set to, but hit the number button twice (5,5)   Also try setting the zip to ID 6 and try that.   Don't forget to terminate the drive and all that.

If you don't have the SCSI ID screen when you hit transpose, you may try booting from some floppies you might have gotten, the HD might contain an older OS.


  ----- Original Message ----- 
  From: ted Summers 
  To: emax@yahoogroups.com 
  Sent: Friday, April 14, 2006 7:43 AM
  Subject: Re: [emax] Re: Emax HD questions


  I was wondering about that. Not like there aren't enough OS versions  
  out there to confuse...

  I will try it. Thanks for the answer.

  Ted

  On Apr 14, 2006, at 3:14 AM, esynthesist wrote:

  > Hi Ted, as far as I understood an EMAX SE HD can only have an external
  > SCSI port after an upgrade. So your machine clearly has been  
  > upgraded :-
  > )
  > Now the original EMAX SE HD operating system (the one you probably  
  > use)
  > does not support the transposition of the SCSI ID, as the internal  
  > scsi
  > hd was fixed to ID 0 in the original EMAX SE HD.
  >
  > The SCSI upgrade contained a special SCSI software disk which enables
  > you to select the SCSI ID.
  > But I think you can also use the EMAX OS PLUS operating system.  
  > This OS
  > supports SE and also supports internal/external SCSI hd's. The OS can
  > be downloaded of course from
  > http://www.emulatorarchive.com/Samplers/EmaxOverview/EmaxOS/ 
  > emaxos.html
  >
  > Just format a disk in you EMAX and put the Plus OS on it by using EMX
  > or EMXP.
  >
  > Hope this helps...
  >
  > ///E-Synthesist
  >
  > --- In emax@yahoogroups.com, "ted Summers" <djtbs1@...> wrote:
  >>
  >> So, I have an internal HD. ID is set to whatever the factory setting
  >> is (0 I believe). Emax will boot from it. OS version says Emax SE HD
  >> 1.1. Have a floppy with this os ver too and can boot from it as well
  >>
  >> Just got a Zip100 Plus (SCSI Autodetect). Hooked to external port.
  >> Whenever I try to use the transpose to choose ID 5 (or 6- the two ID
  >> options that the Zip100 has), The Emax never gives me a SCSI ID
  >> choice. Nor is there (after selecting Special) a 0 choice (and if I
  >> hit 0 I get nothing). Any ideas?
  >>
  >> Thanks,
  >> Ted
  >>
  >
  >
  >
  >
  >
  >
  >
  > Emax and Emax II User's Group Website
  >
  > http://www.silveriafamily.com
  > Yahoo! Groups Links
  >
  >
  >
  >
  >
  >
  >
  >



  Emax and Emax II User's Group Website

  http://www.silveriafamily.com 



  SPONSORED LINKS Electronic instrument  Emax  Synthesizer music  
        Electronic music  Music sampler  Electronic musical instrument  


------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS 

    a..  Visit your group "emax" on the web.
      
    b..  To unsubscribe from this group, send an email to:
     emax-unsubscribe@yahoogroups.com
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]