Emax

I have a 5300c that I have had same problem with. They have a single (combined) geo-port and there were problems with the port manager that were supposedly corrected with os 8.6. One person on another forum said he got his 5300c to work with sound designer and os9?, however I hadn't got it to work on mine yet

Sent from Yahoo Mail on Android 
 
  On Mon, Apr 11, 2016 at 12:21 AM, Ted Summers djtbs1@... [emax]<emax@yahoogroups.com> wrote:       
Does it freeze even when the cable is unplugged?
I found a wire had come loose in my cable end and was causing this kind of behavior.
Also- not all ports on all Mac systems work due to apple cheaping out on hardware for the geoport.
If the powerbook has 2 ports, try the other port…

Just a couple of thoughts.

-T

On Apr 10, 2016, at 4:45 PM, dos.putin@yahoo.com [emax] <emax@yahoogroups.com> wrote:

I've been pulling my hair out. A few days ago my Macintosh Classic bit the dust ( Capacitor death)
previous to it dying, I had been using it with my EMAX II to do all the wonderful editing etc. I have the Mac to Emax II RS422 cable (obviously)

So, after my Mac Classic stopped working,
I went out and found a Macintosh Powerbook 5300cs. It was running OS 8.1 when I got it, I downloaded Sound Designer 1.5 from the files section, but it will NOT connect with the EMAX no matter what I try. I even downgraded to OS 7.5. No go. 

I then tried to install the Alchemy 3.0 that is hosted here. When un-stuff'd it shows a program titled "Alchemy™ 3.0 [k]" I try to run this, and it freezes the system just after the menu bar comes up and the outline of the toolbar window. It won't run.

Maybe it's my system? Or maybe it's these distributions of files, that are bogus? 

Anyone got any solid advice on this matter? I would really like to have my old work flow back. Mac and EMAX II are so well suited for each other.

Thanks

-DOS

[Non-text portions of this message have been removed]