Emax

SE 1.1 OS doesn’t have HD support.
There is a SE + HD 1.1 OS, but it doesn’t support other than SCSI ID 0 (boot drive)  
You should use PLUS 1.0 OS which will allow SCSI ID 0-6.
It’s in the files section.

-T



On Oct 22, 2015, at 11:01 AM, nuwavboy@... [emax] <emax@yahoogroups.com> wrote:


Greetings fellow humans - 



second time owing the rack, trying to figure this out again. I have floppies that boot the SE1.1 OS, but the internal drive is not reading. Do I need a different OS to boot the internal hard drive? Should I assume the hard drive is toast? It looks like the original miniscribe.



  I bought a greenleeDB25 punch and have ordered a DB25 to IDC50 bracket so I can run it off an external zip. 



  Last one I had, I put a slim floppy in it and a Micron cf card reader something or other. I'm wondering if it would be better to put a slim floppy and a scsi to IDE adaptor with a CF reader in it? Since the floppy is working, it seems like more work and I have plenty of scsi ZIP drives laying around.



thoughts?



tom