Emax

My suggestion- reseat the chips on the Audio board which are socketed.

-T

On Sep 25, 2015, at 8:40 PM, Jose housemusicmaker@... [emax] <emax@yahoogroups.com> wrote:


Krikor

I have the exact same thing happen on my emax rack.  I do not recommend you do what I did but it temp fixed  mine for a few months.  Out of despair, unable to figure out, anger led me and  I took the butt end of a screwdriver and give it a few hits to the right of the LCD about 2 inches and 2 inches down by where the text menu printing are while playing a sample. After a about 3 hits, the sound returned to normal. If you decide to try, place a thin cloth to avoid scratching the face.  I hit it like when hitting drum pads strength.  I still don't know what it fixed/unstuck.  It's happened a few times again, but the hit fixes it for me until I can find out what is in that area that needs a hit to get rid of the distorted hiss noise.  Your could be different but mine had the exact sound in your clip.  For legal reasons and the record, I do not advise you do this and do at your own risk.  Good luck.
From: krikor kouchian krikorola@gmail.com [emax] <mailto:emax@yahoogroups.com>
Sent: ‎9/‎25/‎2015 1:58 PM
To: emax@yahoogroups.com <mailto:emax@yahoogroups.com>
Subject: [emax] Re: Emax Output distorted

 
Yes distortion on all banks, my own, some factory ones…
I have a rack version.

Le vendredi 25 septembre 2015, Shawn Ward shawnjward@... <mailto:shawnjward@hotmail.com> [emax] <emax@yahoogroups.com <mailto:emax@yahoogroups.com>> a écrit :
>  
>
> do you get distortion on all samples/banks that you load?
>
> i had some problems with distortion that were software related to corrupt data in the banks
> you should rule this out before troubleshooting a hardware problem
>
> also i have noticed if i have the keyboard local on i get some alias behaviour so i saved all my samples after taking local off
>
> ________________________________
> To: emax@yahoogroups.com <mailto:emax@yahoogroups.com>
> From: emax@yahoogroups.com <mailto:emax@yahoogroups.com>
> Date: Fri, 25 Sep 2015 15:36:21 +0200
> Subject: [emax] Emax Output distorted
>
>  
> Hello
> I'm having a distorted output on my emax.
> I recaped the whole analog board, everything was fine, I didn't use it for 2 weeks and when i put it back one, the main output was distorted, like aliased.
> I check the separate output and they are the same.
> I try to change for another PSU and it acts the same.
> here is the sound file:
> https://dl.dropboxusercontent.com/u/35667344/Emax%20Ouput%20mono.aif <https://dl.dropboxusercontent.com/u/35667344/Emax%20Ouput%20mono.aif>
> Any one had a similar problem?
> best
> K
> http://www.krikor.fr <http://www.krikor.fr/>
> +33632199413
>
> For Live&Dj bookings contact: cedric@... <mailto:cedric@...>
>
> 

-- 
http://www.krikor.fr <http://www.krikor.fr/>
+33632199413

For Live&Dj bookings contact: cedric@... <mailto:cedric@...>